Available Controls
Pan, Tilt, Zoom, Focus, Iris (auto/manual), Pan & Tilt Speeds, Pan & Tilt reverse direction, 8 x
preset positions (upgradable to 32) of Pan, Tilt, Zoom & Focus, White Balance (Auto, ATW,
5k6, 3k2, Manual), Red Gain, Blue Gain, Detail, Shutter, Master Gain, Gamma.
The camera can be set to either HD or SD but does not offer both simulataneaously
.
Pan & Tilt Speeds
The latest versions (from Ser.No. BE_121098) all have 10 speed ranges. Both Pan and Tilt
speed ranges move up and down together.
Speed 10
is intended for fast sport applications
and has a faster reaction time but does not have feedback motor control.
Speed 9
gives the
same top speed, a smoother uptake and full feedback speed control.
All previous versions can be upgraded to the latest software version.
Blue Status LED
The blue LED on the side of the CamBall 2 indicates the status of the unit.
On power up the LED will flash 3 times. This indicates that power is OK and the
microprocessors are functioning correctly.
Slow flashing (1 on and 1 off per second)
-
No data or incorrect data
Continuous on
-
System Data OK but not being addressed
Fast flashing (25 times per second)
-
Camera being addressed by controller
Specifications
Weight:
1.5kg
Data:
RS485. Max. cable length 1km.
Power:
12-16v @ 1A
Outputs:
Standard Definition
PAL 4:3, PAL 16:9, NTSC 4:3, NTSC 16:9 - Composite, Y/C, SDI
High Definition
1080i/50, 1080i/59.94, 720p/50, 720p/59.94, - Component, HDSDI (10 bit)
Camera:
2 Megapixel HD CMOS chip.
S/N >50dB
HDSDI latency < 1 video line
Jitter < 0.04 UI
Lens:
10:1 Zoom, 51deg. - 5.1deg. (16:9).
Distortion:
<3% (wide)
F.1.8 - 28 (17 steps)
Operating Temp:
-10 to +40degC ambient
P a g e 4
P a g e 1
