background image

MPS OWNERS MANUAL

To The Owner.

Dear Owner,

Congratulations on selecting a Brivis Heating System.

At Brivis we take pride in all aspects of servicing our customers. Our people are committed to upholding
the ethics originally formulated by my father when he founded Brivis over 40 years ago. Our aims are to
ensure your comfort and satisfaction by providing the best quality product and service, together with a
genuine concern for our environment.

To all new customers buying a Brivis product for the first time, welcome!

If you are already an established Brivis customer, thank you for your continued support. I am sure you will
be happy with the choice you have made.

Yours sincerely,

Tim O'Brien

Managing Director
Brivis Australia Pty Ltd

Understanding Central Heating.

To make the most of your central heating you first need to be familiar with its basic operating principles.

Put simply, your Brivis system consists of three major components; a heater, a ductwork system and a
wall control, which, in this case is the revolutionary Brivis Networker.

The heater draws air out of the house through a large, centrally located Return Air duct. Once heated, the

Summary of Contents for MPS













Reviews: