9120LBLA
SMOKE
ALARM
120V AC, 60Hz Wire-in with 10 Year Sealed battery backup
IONIZATION
DUAL IONIZATION
Dual Ionization sensing chamber.
Generally more effective at detecting
small particles produced by flaming
fires. Sources may include paper or
kitchen grease.
INDICATOR
LATCHING ALARM
LOW BATTERY
WARNING
10 YEAR
WARRANTY
10 YEAR SEALED
BATTERY BACKUP
Remembers which unit initiated an alarm.
10-year warranty on lithium
battery - No battery changes needed.
SINGLE BUTTON
TEST/SILENCE
Silences and tests alarm with a
single button.
The BRK Brands, Inc. model 9120LBLA is a wire-in, 120V AC 60Hz single and/or multiple
station smoke alarm specifically designed for residential and institutional applications
including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family
dwellings as defined in standard NFPA 101. Model 9120LBLA complies with CAN/ULC S531.
They meet building codes where AC and AC/DC with Silence smoke alarms are required. The
alarms are interconnectable with up to 18 devices, of which 12 can be smoke alarms.
The BRK
®
9120LBLA alarm feature a dual ionization smoke sensing chamber screened for
insect protection, an 85dB horn, and a “silence” feature. The “Smart Technology” system is
designed to reduce nuisance alarms. “Latching Alarm Indication” remembers which unit
initiated an alarm. When interconnected in a series, the unit that triggered the alarm rapidly
flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in
memory or “latch” the information and begin to flash the green LED indicator 2 seconds on,
2 seconds off. The “Perfect Mount” system features a gasketless base and a mounting
bracket that keeps the alarm secure over a wide rotation range to allow for true alignment.
This will allow fine-tuning on the positioning to compensate for out of aligned wall studs and
to keep the wording level when wall mounting. A Single button test/silence button eliminates
confusion. Depending on what mode the alarm is in, pushing the button will test, silence,
re-test the alarm when in silence and clear the latching feature. Other Contractor Preferred
features include a dust cover to keep alarm clean during construction, keyhole slots in the
mounting bracket eliminate the need to remove the electrical box screws for installation.
Two locking features are provided to prevent battery theft and/or theft of the unit.
Connection to AC power is made with a “Quick-Connect” wiring harness. Installation is quick,
easy and cost effective.
LOUD 85DB ALARM
IONIZATION
10
