Package contents
Installation
Name:
Components
included with unit:
table lamp
JACK O’LANTERN PC1086
The manufacturer assumes no liability for damage resulting from failure to adhere to
the steps described in this manual. When unpacking the light, do so with regard for its
material composition – the main components are made of glass and very fragile
materials.
1x glass globe, 1x marble body with metal frame, 1x metal cap with light
source socket and power cord (2.4m), 1x pair cotton gloves, 1x installation
manual
TECHNICAL SUPPORT
info@brokis.cz
www.brokis.cz
1.
OFFICE
Španielova 1315/25, Praha Řepy, 16300, Czech Republic
ID 64940799, VAT CZ64940799
SHOWROOM AND FACTORY
Sídliště Janštejn 39, Horní Dubenky, 588 52,
Czech Republic
Installation time: 20 min (1 person)
Wear the provided cotton gloves when unpacking and assembling the light.
Place the glass globe in the metal frame taking care not to damage either of the components. Ensure the
globe has been positioned precisely. Carefully install the light source in the metal cap, which is fitted with
a magnetic ring, and insert the assembly into the glass globe. The magnets will securely attach the light
source assembly to the glass globe. Ensure the metal cap is attached around the entire circumference.
Switch on power at the main circuit panel.
1.
Prior to shipping, the functionality of each light and its components is thoroughly tested.
The manufacturer assumes no liability for the mishandling of products.
1.
2.
