background image

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT7382

FULL MOTION DESK MOUNT WITH SINGLE ARM

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Desk Mount

Crosshead

screwdriver

Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6

Product Dimensions..........................................................................................................................15
B-Tech Contact Details.....................................................................................................................16

PLEASE KEEP THIS FOR FUTURE REFERENCE

2.5mm Hex Key

(Supplied)

4mm Hex Key

(Supplied)

  Designed for screens up to 24" (61cm) / 9kg (20lbs)  

  Fits screens with VESA mounting patterns:  

75 x 75mm and 100 x 100mm 

  Optional desk clamp and grommet included 

  Maximum extension is 390mm (15.4”) 

  Easy tilt adju/-40° tilt 

  Features two swivel points: 360° at pole and 180° at interface 

  Simple installation with all mounting hardware included 

Summary of Contents for BT7382

















Reviews: