1
www.bticino.com
ST-00000695-
344682
B
A
C
2
9
3
4
5*
7
6*
1
10
11
12
8
A
B
C
164 mm
165 mm
20,5 mm
17/03/2020
EN
Classe100 X16E 2 WIRES / Wi-Fi handsfree
video internal unit with inductive loop
Legend
When pressed, the keys light up and emit a “beep” (that can be deactivated by procedure).
1.
Loudspeaker
2.
5” (16:9) display
3.
Wi‑Fi signal notification LED
Red LED flashing: WI‑FI on but not connected to the network
LED off: WI‑FI disabled or working correctly
Red LED on steady: Classe100 X16E is exchanging data with the Door Entry
CLASSE100X App (automatic switch on)
4.
Bell exclusion notification LED
Red LED flashing: bell excluded
5.
Programmable touch keys *
6.
Door lock release touch key *
White LED flashing: active Professional Studio (Office) function
7.
Entrance panel / scrolling activation touch key
8.
Tactile guides for the blinds
9.
Communication disabling key
Red LED flashing: call in progress
10.
Microphone
11.
Staircase light touch key
12.
Communication enabling key
Green LED flashing: incoming call
* If the LEDs flash white when pressed, the “safe door lock” function is active and
the key is deactivated.
Front view
2 WIRES / Wi‑Fi handsfree video internal unit with inductive loop and 5” colour LCD
display.
It has 2 physical keys for the control of the main video door entry functions – answer
and end a call – and 3 capacitive keys that allow the door lock release, the entrance
panel activation/scrolling, the staircase light control and the customisation of most
frequently used quick actions – e.g. intercom, additional door lock activation, generic
activations.
The device has a side lever to adjust: colour, brightness and display contrast, audio
volume, call tone volume and Wi‑Fi configuration.
There are call exclusion notification LEDs and Wi‑Fi.
Also, thanks to the Wi‑Fi connection, you can associate the video internal unit to the
Door Entry CLASSE100X app (available for Android and iOS).
You can manage the main video internal unit functions (receiving calls, opening
the door lock, activating the entrance panel/scrolling, FWR updating and additional
activations) from the app.
The installation can be made to the wall using the bracket or using table base.
Description
Dimensional data
344692 Tabletop support
Related items
Power supply:
18 – 27 Vdc
Maximum SCS absorption in Stand by: 37 mA
Maximum SCS absorption in operation: 400 mA
Maximum cable section for each clamp: 2 x 1 mm
2
Operating temperature:
5 – 40 °C
Wireless device in compliance with 802.11b/g/n standard, frequency 2.4 – 2.4835 GHz;
transmission power < 20 dBm. WEP/WPA/WPA2 safety protocol.
Teleloop: frequency 0 – 9 kHz, transmission power < 1.005 A/m.
Ports and protocols used by Classe100 X and DoorEntry App
‑ 5228 SIP (used by Classe100 X and mobile app)
‑ 0 to 65000 UDP (runtime negotiated for multimedia streaming)
‑ 8883 MQTT (used by Classe100 X for Cloud connection)
‑ 80/443 HTTP/HTTPS
Technical data