Biosec Home User Instructions
Opening the safe for the first time:
•
Press the black button on the front of the keypad to reveal the fingerprint scanner and
buttons.
•
Insert the batteries into the external battery box.
•
Connect the external battery box to safe via the jack socket on the keypad.
•
Put any finger on the fingerprint reader and the door will open.
•
Take the batteries out of the external battery box and insert them into the battery
compartment on the back of the door.
•
Caution: As the factory setting fingerprint is blank you can use any fingerprint to open the
safe when you first open it. This is just for first opening only, you must add new fingerprint
as your user fingerprint.
Adding a new fingerprint:
•
Find the red code setting button on the back of the door.
•
First press the red code setting button briefly, the screen will read ‘Fingerprint’.
•
Whilst the screen reads ‘Fingerprint’ press the red code setting button for 3 seconds and the
main menu will be displayed.
•
Select “Keys” from the menu by briefly pressing the red code setting button.
•
Select the user that you want to programme by briefly pressing the red code setting button.
You can scroll down the list of users by pressing the ‘Down’ button.
•
Select “Append” by briefly pressing the red code setting button.
•
Place your finger on the fingerprint reader and wait for the scan to be completed, the screen
will read ‘Scanning’ then ‘Reading’ and finally ‘Succeed’ to confirm that this has programmed
correctly.
Opening the safe:
•
Press the black button on the front of the keypad to reveal the fingerprint scanner and
buttons.
•
Place your finger on the fingerprint scanner.
•
The safe will open.
