All our safes come with a 2 year
warranty as standard. Consumers can
Register on-line to increase the warranty
to 5 years where products show the 5
Year Consumer Warranty badge.
Security Safes displaying the Home
series Safe For Longer free replacement
badge benefit from the 5 year warranty
and a free replacement in the event of
burglary.
*Ts & Cs apply, visit our website
for full details
Please register online to qualify for the
additional warranty at
5 Year
Extended
Warranty
www.burtonsafes.co.uk | +44 (0) 1484 663388 | enquiries@burtonsafes.co.uk
Brockholes Business Park, Rock Mill Road, Holmfirth, HD9 7BN
•Always carry out programming when the lock
is open and safe door is open.
•Before closing the safe door, make sure that
all the programming is correct.
•Check a new code at least 3 times before
closing and locking the door to ensure that
the code has been changed correctly.
•The system does not allow the master code,
the manager code, and the user code to be
set at six zeros (0-0-0-0-0-0) or six nines
(9-9-9-9-9-9).
•To save battery power, the system switches
to standby mode if no button is pressed
within 10 seconds. Standby mode is
indicated by two short beeps. Input process
es that have not yet been completed must be
repeated completely.
•Do not allow your personal code to be spied
on. When entering the code, always cover the
keypad as well as possible so that no one
can see which numeric key you are pressing.
Important
Rated voltage:
DC 9V
Working temperature
: -25
°
~ 60
°
Humidity during use:
<90%.
Code length:
6 digits
Safe locks certified in accordance with
EN1300 are not permitted to be opened
by fingerprints only (without additional
code entry).
Only suitable for indoor use
Specifications
burtonsafes.co.uk
ScanLogic Basic
FPC-1808-II (VdS)
To be used with locks
EL-0601, EL-0701, EL-0901
www.burtonsafes.co.uk
B퀁t쀃
Duo
Fingerprint Lock
