5
USER INSTRUCTIONS - TORINO LOCK
Incorrect entry
ABOUT THE LOCK
This lock requires a 6-10 digit code to open. You
can have 2 different codes, the master code and
the secondary code. You have been provided
with an emergency overrride key for this safe -
do not keep the keys inside the safe.
• If you have entered an invalid code, the red LED will light up and the
lock will beep
• After 3 incorrect codes, the keypad will be disabled for 1 minute and
the red LED will stay lit throughout this period
• Once the time period is over, the green LED will light up
How to close the safe
•
Ensure that the bolts are fully retracted (turn the knob if
necessary)
• Gently push the door shut. Always ensure that there are no
objects or people in the way of the closing door
• Turn the knob anti-clockwise until it stops
How to open the safe
• Press the [ON] key and enter a valid 6-10 digit code
(Factory default ‘111111’)
• Press the [ENTER] key. The green LED will light up
• Within 5 seconds turn the knob clockwise to retract the bolts
• Open the safe door
