HVLP/PRESSURE REDUCED AIR CAP AND FLUID NOZZLE CHART
MODEL
NO.
AIR CAPS
FLUID TIP
RANGE
*MAX GUN
INLET PRESS.
FOR HVLP
FAN
CONTROL
SCFM @
MAX GUN
INLET
STANDARD
IN CAT
PACK
AVAILABLE FLUID
NOZZLES TIPS
NEEDLES /
marking on needle
Included
33-0208 0.8mm (.022")
40-1308 (308)
33-0210 1.0mm (.040")
40-1310 (310)
33-0212 1.2mm (.046")
40-1312 (312)
Included
33-0213 1.3mm (.052")
40-1313 (313)
33-0214 1.4mm (.055")
40-1314 (314)
33-0215 1.5mm (.059")
40-1315 (315)
Included
33-0217 1.7mm (.070")
40-1317 (317)
33-0219 1.9mm (.075")
40-1319 (319)
33-0222 2.2mm (.086")
40-1322 (322)
Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4)
*Note: Air cap test gages are available to confirm HVLP compliance.
*Gun inlet pressures may vary as required by application
CPR
60-1504 (S)
23-2101
CPR
(Pressure
Reduced)
23-1301
(HVLP)
0.8 - 1.7
0.8 - 2.2
29*
29*
11
13.5
CPR
PRESSURE FEED SPRAY GUN
PRODUCT INFORMATION
Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708
www.spraycat.com
The CPR gun comes equipped with both a pressure reduced air cap 23-2101 and a HVLP air cap
23-1301 for areas requiring HVLP compliance.
23-2101 - consumes 11 cfm at 29 psi gun inlet.
23-1301 - consumes 13.5 cfm at 29 psi gun inlet.
23-2101 pressure reduced air caps can be used with the 0.8 mm - 1.7 mm fluid orifices listed below.
23-1301 HVLP air caps can be used with the full range of fluid orifices listed below.
DISTRIBUTED BY:
Pro Wood Finishes
14622 Southlawn Lane
Rockville MD 20850
Ph: (301) 424-3033
