For more details on operating this timepiece
please refer to the enclosed booklet or visit :
MECA-QUARTZ
CHRONOGRAPH
To ensure correct care, please take
some time to review the enclosed
instruction to review how to operate
your watch.
E n d u r a n c e
This watch is powered by a Japanese
made “Meca-Quartz” movement. It
combines a battery regulated engine
with a mechanical chronograph
module. The result is a watch which
delivers the meticulous pinpoint
precision of a quartz movement along
with the crisp, flyback handfeel and
visual charm of mechanical watches.
0 1 2
CROWN
(MOV’T VK64)
60
40
20
DATE
MINUTE HAND
STOPWATCH
MINUTE
HAND
STOPWATCH
SECOND
HAND
HOUR HAND
24 HOUR
HAND
PUSH
BUTTON A
PUSH
BUTTON B
TACH
YM
ET
R
E
M E C A - Q U A R T Z
1 0 0 m / 3 3 0 f t
60
30
45
15
6
18
24
12
TACHYMETER
1. Pull the crown to position [1]-(1st
click).
2. Turn the crown clockwise to set the
correct date.
3. Push the crown in.
* Do not set the date between 9:00
P.M. and 3:00 A.M. , otherwise the
day may not change properly. If it is
necessary to set the date during the
time period, first change the time to
any time outside it, set the date and
then reset the correct time.
0
1
0
HOW TO SET THE DATE
HOW TO SET THE TIME
1. Pull the crown to position [2]-(2nd
click).
2. Turn the crown clockwise to set the
correct time.
3. Push the crown in.
* Take a.m./p.m. into consideration
when setting the hour and minute
hands to the desired time.
* When the crown is at the position
[2], do not press any button,
otherwise the chronograph hands
will move.
0
2
1
0
1
2
3
4
Instruction
Manual
Restart and stop of the stopwatch can
be repeated by pressing the button A.
ACCUMULATED ELAPSED TIME
MEASUREMENT
STOP
RESET
START
STOP
RESTART
STOPWATCH FUNCTION
• The measurement of time is
indicated by the stopwatch hands
that move independently of the
center hands and 24-hour hand.
• The stopwatch can measure up to 60
minutes.
STANDARD MEASUREMENT
START
STOP
RESET
Vol.1.02 EN
