CA L•R OYAL
ES1433 Series
PRODUCTS, INC .
Electric Strike Installation Instructions
The ES1433 Series electric strikes are designed to accommodate cylindrical locksets with up to 3/4" (19mm) latch throw.
The strikes can be configured to fail-safe or fail-secure on site.
Specifications
Operating Voltage
12 / 24VDC
Current Draw
300mA / 12VDC, 150mA / 24VDC
Operating Temperature
32
°
F to 120
°
F (0'C to 49
°
C)
Humidity
0% to 85% Non-condensing
Latch Throw
3/4"(19mm) [ 5/8"(16mm) strike
depth, 1/8"(3mm) door gap]
Keeper Width
1 7/16" (36mm)
Static Strength
1500 lbs (680Kg)
(UL Witness test: 2000lbs)
Dynamic Strength
70 ft-lbs
Endurance
250,000 cycles (UL tested)
1,000,000 cycles (Factory tested)
Destructive Attack: Level I
Performance Level
Line Security: Level I
Standby Power: Level I
Endurance: Level IV
Fail-Safe/ Fail-Secure Reversible
Change screw position at fail-safe / fail-secure hole to
the desired setting.
Fail-Safe:
Fail-Secure:
@
FAf-SECURE
u@
FAILSAl'EJI
@FA/iLSEClR:
u®
FAILSAl'EJI
Frame Application
Model
Latch Monitor
Body Construction
ES1433
-
Zinc Alloy
UL Requirements
• For indoor use only.
• Wiring methods shall be in accordance with NFPA70.
• The ES1433 series is intended to be used with UL Listed
Exit Hardware.
• The ES1433 series shall not impair the intended operation
of an emergency exit.
• The ES1433 series shall not impair the operation of panic
hardware mounted on the door.
ES1433 Series
Compatible Locksets
Wood Frame Installation
Hollow Metal Frame Installation
Face late
Keeper
Strike Body
CAL-ROYAL
P R O D U C T S, I N C. U.S. A.
Cylindrical
(Key-In-Lever)
Cylindrical
(Key-In-Knob)
DWG # ELG8009, P1/2 , 20220407
