INSTALLATION INSTRUCTION FOR F
7700x120
FIRE SURFACE VERTICAL ROD EXIT DEVICE
NOTE: ALL FIRE RATED APPLICATION ARE REQUIRED TO USE THE SEX BOLTS.
AUX FIRE
LATCH ASS'Y(TOP)
AUX FIRE
LATCH ASS'Y(TOP)
HORIZONT�?
Ge CHASSIS
l
CHASSIS
---
ASSEMBL Y
PULLMAN LATCH
..,._
__
TOP CHASSIS
'---., ASSEMBLY
,'----,
,',
�-'
I
�
,
"--J
TOP
ROD
GUIDE
,�- TOP ROD
LIFT ARM
MAIN SLIDE
STEEL BOTTOM COVER
I-
VERTICAL
( LHRB )
� CHASSIS
END CAP
1---
STEEL TOP COVER
MOUNTING
RAIL
SURFACE OF DOOR FOR
EXIT DEVICE APPLIED MUST
SLIDING
SHIM
RAIL MOUNTING
BRACKET
BEFORE INSTALLING DEVICE, PLEASE CHECK:
1. IF DOOR FITTED AND HUNG.
2. SIZE OF EXIT DEVICE, FUNCTION AND DESIGN ...
2.1. 36"DOORS, CAN BE CUT TO FIT DOORS DOWN TO 30"
WIDE.
2.2. 48"DOORS, CAN BE CUT TO FIT DOORS DOWN TO 36"
WIDE.
2.3. HAND OF DEVICE AGAINST APPLICATION
OUT
RIGHT HAND
_A�
REVERSE BEVEL � • �
LEFT HAND
REVERSE BEVEL
TO CHANGE HAND OF F9860V EXIT DEVICE.
1.REMOVE CHASSIS PINS AND MAIN SLIDE.
HEAD COVER
2.REMOVE LIFT LEVER PIN AND LIFT LEVER.
3.REASSEMBLE LIFT LEVER AT OPPOSITE SIDE, AS SHOWN.
4.REPLACE MAIN SLIDE AND CHASSIS PINS.