CALIFORNIA ACCENT LIGHTING, INC.
2820 E. Gretta Lane, Anaheim, CA 92806
ph. 800.921.CALI (2254) | fx. 714.535.7902 | info@calilighting.com | calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
1 / 29 / 2021 / Rev 2
Page 1 of 16
Overview
ALS
500T-RMW-TB
INSTALLATION INSTRUCTIONS
IMPORTANT NOTICE:
VERIFY CORRECT LUMINAIRE WAS RECEIVED WITH
CORRECT COLOR TEMPERATURE, VOLTAGE, AND WATTAGE BEFORE CUTTING OR
INSTALLING. CALI WILL NOT BE RESPONSIBLE IF INCORRECT LUMINAIRE IS INSTALLED.
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
• Electric Hammer Drills (optional)
• 14.4 to 28 Volt Cordless Drills
• Phillips Bits - Sufficient Quantity
• Utility Knife
• Electrical Cords
• Marker
• Wire Strippers
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tapes
• Chalk Line
• ALS500T-RMW can be mounted to concrete, wood, or metal using proper
mounting hardware.
• Ensure surface material can support the weight of the luminaire.
ELECTRICAL
INSTALLATION RECOMMENDATIONS
INSTALLATION TOOL REQUIRED
• ALS500T-RMW requires a remote driver. The driver may be mounted on
top of the luminaire or in a remote location.
• Drivers are 120V - 277V (UNV) Input Voltage and 24VDC Output Voltage
• To calculate driver size, determine Watts per Foot.
Example:
4W per Foot
• Determine Length in Feet.
Example:
20’
• To calculate Load, Multiply Watts per Foot x Length in Feet
Example:
4W x 20’= 80W. The Load of the driver is 80 Watts.
• Maximum load for a Class 2 low voltage luminaire is 96 Watts
END VIEWS (With T-Bar Ceiling Trim)
1.38”
3.27”
7.25”
3.60”
Max.
7.0”
1.72”
Hanging Bracket Assembly
(ALS500T-RMW-HB)
1.72”
5.27”
X (Specified Length)
1.38”
7.25”
Aircraft Cable Assembly
(ALS500T-RMW-AC)
• Indirect lighting
• 24 Volts DC for easy and safe installation
• Long life, energy efficient LEDs
• Available in 4 Watts up to 12 Watts Per Foot
• Can be ordered to specific lengths for when exact dimensions are known
Example:
10 x 10’6” (product is shipped in 8’ max luminaires)
• Available for indoor (DRY) and (DAMP) rated installations
PRODUCT INFORMATION
CONTENTS
DESIGN GUIDELINES
Page 2
HANGING BRACKET MOUNTING
Page 3 - 5
AIRCRAFT CABLE MOUNTING
Page 6 - 9
REFLECTIVE FILM
Page 14
TROUBLESHOOTING
Page 15
CARE & MAINTENANCE
Page 16
FEATURES
APPLICATIONS
Indirect Lighting
LENS
Clear
LENGTH
Built to Order (± 0.25” Tolerance)
CONSTRUCTION
Aluminum Extrusion
FINISH
White Powder Coated
DRIVER
Remote
WEIGHT
4.50 lbs per foot
MOUNTING
Mounting Brackets or Aircraft Cable
LISTING
Dry or Damp Location
UL1598, CSA C22.2#250.0
UL8750, CSA250
UL2108, CSA C22.2 #9
TEMPERATURE
RATINGS
Operating / Startup:
-20° to 48°C (-4° to 120°F)
Storage:
-40° to 76°C (-40° to 170°F)
