CX-ED1410
‘ANSI’ Fire Electric Strike
Installation Instructions
1. Description
Camden CX-ED1410 Grade 1 ANSI strike for cylindrical
locksets offer the very best strike quality and performance,
with a stainless steel faceplate provided. The ‘ANSI’ fire strike
design delivers unparalleled application flexibility, with field
selectable voltage and fail safe/fail secure operation.
1- 4 PIN power connector
4- Wire nuts
5- M5 x 12 mm screws
2- #10 x 1 1/4” wood screws
2- #10-32 x 1/2” screws
2- Mounting brackets
2- Spacers
1- Varistor
This Package Includes:
Page 1 of 3
2. Specifications
3. Dimensions
(32mm)
1 1/4”
(12mm)
(86mm)
3 3/8”
1/2”
(32mm)
(16mm)
1 1/4”
(42mm)
1 5/8”
(47mm)
1 7/8”
(19mm)
3/4”
(19mm)
3/4”
5/8”
(124mm)
4 7/8”
(105mm)
4 1/8”
(3mm)
1/8”
(35mm)
1 3/8”
(35mm)
1 3/8”
(35mm)
1 3/8”
BP10200
Note: Fire rating applicable only while in fail secure mode.
Voltage
12/24V AC/DC
Current Draw
260mA@12V AC/DC
150mA@24V AC/DC
Static Strength
1,500 Lbs.
Dynamic Strength
70 Ft-Lbs.
Endurance
1,000,000 Cycles (Factory Tested)
250,000 Cycles (UL Verified)
Fire Rating
90 minutes (UL verified)
Latch Projection
5/8” - 3/4” (16mm - 19mm)
Mode
Field Selectable
Fail Safe/Fail Secure
Operation
AC-Buzz
DC-Silent
Duty
Continuous
Dimensions (Body)
3 3/8” H x 1 7/8” W x 1 3/8” D
(86mm x 47mm x 35mm)
