background image

1. Read all manuals included

with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.

2. Follow all local electrical and safety

codes as well as in the US, National
Electrical Codes (NEC) and Occupational
Safety and Health Act (OSHA).

Do not operate
unit if damaged

during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.

General Safety
Information

CALIFORNIA PROPOSITION 65

This product
or its power cord

may contain chemicals known to the
State of California to cause cancer and
birth defects or other reproductive
harm. Wash hands after handling.

GENERAL SAFETY INFORMATION

Since the air compressor and other
components used (filters, lubricators,
hoses, etc.), make up a high pressure
pumping system, the following safety
precautions must be observed at all times:

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Description

Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols. 

Danger indicates an
imminently

hazardous situation which, if not avoided,
will result in death or serious injury.

Warning indicates 
a potentially

hazardous situation which, if not
avoided, COULD result in death or
serious injury.

Caution indicates a
potentially

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates
important

information, that if not followed, may
cause damage to equipment.

Unpacking

After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before putting
unit into service. In case of questions,
damaged or missing parts, please call 1-
800-543-6400 for customer assistance.

Have the date code, model number,
and parts list (with missing parts
circled) before calling.

Operating Instructions and Parts Manual

FP209800

L

IN626700AV  7/08

Breathable Air Warning

This compressor/pump is not
equipped and should not be used
“as is” to supply breathing quality
air. For any application of air for
human consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety
and alarm equipment. This
additional equipment is necessary
to properly filter and purify the air
to meet minimal specifications for
Grade D breathing as described in
Compressed Gas Association
Commodity Specification G 7.1 -
1966, OSHA 29 CFR 1910. 134,
and/or Canadian Standards
Associations (CSA).

DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper in-line
safety and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and
Campbell Hausfeld disclaims any
liability whatsoever for any loss,
personal injury or damage.

STOP!

Record the Model No., Serial No. and
date of purchase located on the base
below the pump in the space below.

Model No. ____________________

Date Code ____________________

Date of purchase _________________

Retain these numbers for future
reference

.

Oilless Compressors

DO NOT RETURN THE
PRODUCT TO THE
RETAILER! CALL 
1-800-543-6400

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

See Warranty on page 8 for important information about commercial use of this product.

© 2008 Campbell Hausfeld/Scott Fetzer

For parts, product & service information

visit 

www.chpower.com

MANUAL

Summary of Contents for Oilless Compressors FP209002L

























Reviews: