VIDEO/AUDIO
MATRIX
(VAX-8404F)
4 In 4 Out
USER MANUAL
V1.0
VAX-8404F
Package Contents-
▪
1 AVLINK VAX-8404F video/audio matrix
▪
1 user manual
▪
1 power adapter DC 12V 1.25A
▪
2 rack rails, 8 screws
Any thing missed, please contact with your vendor.
Introduction
Through the video/audio matrix VAX-8404F, you can display /
play different images / audio signals to 4 screens / speakers (or
earphones) through 4 PC. And you can also control the source of
image / audio by selecting PC signal source 1 ~ 4 or turning off
source input.
Video/Audio matrix is ideal for:
▪
Test bench facilities
▪
Data center
▪
Help desks
▪
Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities
Features
▪
Intelligent functionality.
▪
With 350 MHz pixel frequency.
▪
Support VGA, SVGA, UXGA, QXGA resolutions.
▪
Support Multi-Sync video type include RGBHV, RGsB, RGBS.
▪
Support synchronous Include positive, negative; TTL or 1Vpp
level.
▪
Supports the DDC, DDC2, DDC2B.
▪
Four sets of 7-Segment LED can indicate the input setting
status of input port quickly.
▪
Can be cascaded.
▪
The output is compatible with standard VGA card.
▪
Extends the video signal up to 65 meter (213 feet).
▪
The switches on panel can select PC signal source 1 ~ 4 as
OUT 1 ~ 4 or turning off any signal I/O port / all I/O ports.
Specifications
Function
VAX-8404F
Video Input Connector
4x HD-15 Female
Video Output Connector
4x HD-15 Female
Audio Input Connector
4x
3.5φ Stereo Jack
Audio Output Connector
4x
3.5φ Stereo Jack
Select Switch
10
7-Segment LED
4
Max. Resolution
1920x1440 @ 85 Hz
Pixel Frequency
350 MHz
Cable Distance
(Device to Monitor)
65m (213 feet) Max.
Power Adapter (Min.)
DC 12V 1.25A
Housing
Metal
Weight
1065 g
Dimensions (LxWxH)
269x108x42 mm
-1-
Technical Specifications
Input/Output Signal
Pin #
Signal
Pin #
Signal
1
Red video
9
NC
2
Green video
10 Ground
3
Blue video
11 NC
4
NC
12 ID1
5
Ground
13 Horizontal sync
6
Analog ground
14 Vertical sync
7
Analog ground
15 ID3
8
Analog ground
FRONT VIEW
1. Select Switch
2.
7-Segment LED
REAR VIEW
1. Input Power Jack
2.
“
Audio
Out” Port
3.
“
Audio
In” Port
4.
“Video Out” Port
5.
“Video In” Port
Installation
1. Turn off the power switches of PC, screens, and speakers.
2. Use HD-15 image / 3.5
φ earphone extension cable to
connect VGA interface / audio card in PC and the
“Video
In
“ & “Audio In“ jack of video/audio matrix.
3. Use HD-15 image / 3.5
φ earphone extension cable to
connect screen, speaker, or earphone and the
“Video Out“ &
“Audio Out“ jack of video/audio matrix.
4. Connect video/audio matrix to power supply.
5. Turn on the power switches of PC, screens, and speakers.
6. Control switches, which includes
“Out1“, “Out2“, “Out3“,
“Out4“, “All“, “In1“, “In2“, “In3“, “In4“, and “OFF“, on panel can
get image / audio signals or turn off input signal through
output jack.
-2-
