1
ENG
Notebook Webcam
Article: CN-WCAMN1 USER MANUAL v1.0
System requirements
z
IBM PC or compatible PC or laptop with USB port
z
Pentium 1G or higher CPU
z
Windows 2000/ Windows XP/ Windows 2003
z
Over 500MB free hard-disc space
z
CD-ROM driver
z
256MB memory
z
Support DirectX 9.0 VGA card
z
Installation
Notice: DO NOT PLUG WEB-CAM INTO USB PORT BEFORE DRIVER IS INSTALLED! If the
PC-Cam has already been plugged in, please unplug it and follow the following steps.
1.
Insert Driver/Application Disc into CD-ROM drive, open the driver directly and
double click Setup.exe; the system will automatically run necessary files and give
clear instructions.
2.
Plug Web Camera into USB2.0 port, the system will detect the device and
complete the installation automatically.
When installation is completed, you will find a Camera Icon in your task bar.
Start your Web Cam by selecting the [Application Program > USB2.0 PC Camera > AM
Cap] from Start menu. You will see the preview picture of the Web-Cam.
By Clicking the Video Capture Pin.... from Option Menu you can adjust the resolution
of preview window.
Advanced Settings
By clicking the Video Capture Filter from Option Menu, You can enter into advanced
settings. From this page you can adjust the quality of the picture, set various effects
and enable “Zoom” and “Face Tracing” functions. The advanced settings can also be
accomplished simply by right click on the Camera Icon in Taskbar.
Besides, you can take photos with resolution of up to 2304 * 1728.
Cautions
If the PC/WEB Camera turns hot after operating for a long time, it is suggested to stop
operating for a while.
Avoid contact to the lens with hand, sharp or coarse stuff; use clean and soft cloth for
cleaning
Do not use it in hot, cold, dusty or humid circumstances.
Avoid severe falling which may cause damages to the lens, malfunction or scratches to
the surface.
