WA0123E_WSD00T/WSD00T_LD_User Manual_R10
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail info@capetti.it - web www.capetti.it
1/8
WSD00T / WSD00T_LD
User Manual
1.
Description.
The
WSD00T
and the
WSD00T_LD
are
dataloggers
with one input channels to acquire indoor temperature, with storage
functionality of samples acquired.
2.
Device preset and use mode.
a.
Wireless Mode:
No setup operation is needed. Typically the system is configured from factory so the device is already associated to the system
basestation
. The device is in
STANDBY
mode for which is necessary to start it with the
TEST
command (
refer to chapter
5
-
Installation procedure
.
).
Otherwise, in case the device is in
FACTORY RESET
mode, that means it's ready for connecting to an existing system, in order to
associate it, make reference to the “
WineCap System - User Manual R28 - chapter 4.3.1 Probe/datalogger association procedure.
”
software manual. Is necessary to use the "
WineCapManager
" software on the PC connected to the
basestation
that will be
coupled with the device.
b.
USB Logger Mode:
For this operation mode, stand-alone with data downloads through USB, the connection with the PC and the
“
WineCapManager
” running on it is necessary in order to modify the device 's operation mode. The sampling interval must be
set with the device in "
STAND-ALONE
" mode and automatically, the device 's clock is aligned with the PC's clock, in order to
assure the temporal reference of the sample.
Sampling operations start may be selected disconnecting the USB cable or giving the proper command with the magnetic key.
(
refer chapter
6
-
Stand-alone USB datalogger installation
.
). More details on device 's connection/disconnection through the USB
cable are available on the
WineCap System - User Manual R28
manual.
c.
On field transition from USB to Wireless datalogger:
This transition is practicable in field, during the sampling period, using the wireless network association command. When the
association is done, the
datalogger
becomes a wireless
datalogger
and, besides sending new measures to the
basestation
,
starts a download process towards the same
basestation
of the measures acquired during the stand alone period.
Picture 1 - Product Image
