WA0239E_WSD12T-AV_User Manual_R02
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail info@capetti.it - web www.capetti.it
1/8
WSD12T-AV
User Manual
1.
Description.
The
WSD12T-AV
is a
datalogger
with 3 input channels to acquire outdoor temperature, voltage (
0÷10V
) and current (
4÷20mA
), with
storage functionality of samples acquired.
2.
Datalogger preset and use mode.
Wireless Mode:
no setup operation is needed. Typically the system is configured from factory so the
datalogger
is already
associated to the system
basestation
. The
datalogger
is in
STANDBY
mode for which is necessary to start it with
the
TEST
command (
refers to chapter 3 - Wireless Installation
).
Otherwise, in case the
datalogger
is in
FACTORY RESET
mode, that means it's ready for connecting to an existing
system, in order to associate it, make reference to the “
WineCapManager
” software manual. Is necessary to use
the "
WineCapManager
" software on the PC connected to the
basestation
that will be coupled with the
datalogger
.
USB Datalogger Mode:
for this operation mode, stand-alone with data downloads through USB, the connection with the PC and the
“
WineCapManager
” running on it is necessary in order to modify the
datalogger
's operation mode. The
sampling interval must be set with the
datalogger
in "
STAND-ALONE
" mode and automatically, the
datalogger
's
clock is aligned with the PC's clock, in order to assure the temporal reference of the sample.
Sampling operations start may be selected disconnecting the USB cable or giving the proper command with the
magnetic key. (
see chapter 4 - USB Logger Installation
). More details on
datalogger
's connection/disconnection
through the USB cable are available on the manual.
On field transition from USB to Wireless datalogger:
this transition is practicable in field, during the sampling period, using the wireless network association
command. When the association is done, the
datalogger
becomes a wireless
datalogger
and, besides sending
new measures to the
basestation
, starts a download process towards the same
basestation
of the measures
acquired during the stand alone period.
Picture 1 - Product Image
