background image

TORQUE MEASUREMENT

2 YEAR WARRANTY 

(RESTRICTIONS APPLY)

Imada, Inc. warrants its products to the original purchaser to be free from defects in

workmanship and material under normal use and proper maintenance for two years (one
year for adapters, attachments, batteries, and cables) from original purchase. This warranty
shall not be effective if the product has been subject to overload, shock load, misuse,
negligence, accident or repairs attempted by others than Imada, Inc.

During the warranty period, we will, at our option, either repair or replace defective

products. Please call our customer service department for a return authorization number
and return the defective product to us with freight prepaid.

The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby

disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, non-
infringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or
punitive damages in connection with the use of its products and/or software.

03/09

Complete color 

catalog available.

Call 800-373-9989

or E-mail us. 

Specifications subject to change without notice.

Imada, Inc.

®

3100 Dundee Rd., Suite 707, Northbrook, IL 60062 USA
Telephone: (847) 562-0834     Fax: (847) 562-0839
Web Site: www.imada.com   E-mail: imada@imada.com
ISO 9001 & ISO/IEC 17025 Accredited

Digital Torque

Screwdriver

INSTRUCTION MANUAL

Model: DID-4

Summary of Contents for DID-4







Reviews: