IP65
STAR ECO LED Floodlight Installation Guide
Size
Color Temp Initial
Lumens
PF
3000K
20W
185*135*39mm
COP-ECO-20-FB
1530lm
AC220-240V
50Hz
40
10W
149*105*39mm
COP-ECO-10-FB
3000K
770lm
AC220-240V
50Hz
40
3000K
30W
300*203*39mm
COP-ECO-30-FB
2450lm
AC220-240V
50Hz
40
3000K
50W
300*203*39mm
COP-ECO-50-FB
COP-ECO-20-FB
COP-ECO-10-FB
COP-ECO-30-FB
COP-ECO-50-FB
COP-ECO-20-FB
COP-ECO-10-FB
COP-ECO-30-FB
COP-ECO-50-FB
4050lm
AC220-240V
50Hz
40
>0.9
>0.9
>0.9
>0.9
Light-emitting
area
0.0085
m
2
0.0117m
2
0.0380m
2
0.0380m
2
4000K
20W
185*135*39mm
1700lm
AC220-240V
50Hz
40
10W
149*105*39mm
4000K
850lm
AC220-240V
50Hz
40
4000K
30W
300*203*39mm
2700lm
AC220-240V
50Hz
40
4000K
50W
300*203*39mm
4500lm
AC220-240V
50Hz
40
>0.9
>0.9
>0.9
>0.9
5000K
20W
185*135*39mm
1700lm
AC220-240V
50Hz
40
10W
149*105*39mm
5000K
850lm
AC220-240V
50Hz
40
5000K
30W
300*203*39mm
2700lm
AC220-240V
50Hz
40
5000K
50W
300*203*39mm
4500lm
AC220-240V
50Hz
40
>0.9
>0.9
>0.9
>0.9
0.0085m
2
0.0117m
2
0.0380m
2
0.0380m
2
0.0085m
2
0.0117m
2
0.0380m
2
0.0380m
2
>0m
- THE PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN.
- THE POWER SUPPLY MUST BE TURNED OFF BEFORE INSTALLATION.
- NO WARRANTY WILL BE ACCEPTED IF THIS PRODUCT IS NOT INSTALLED BY A QUALIFIED
ELECTRICIAN.
- DO NOT OPERATE THE PRODUCT WITH A DAMAGED TEMPERED GLASS; THE DAMAGED
TEMPERED GLASS SHOULD BE REPLACED BY THE SERVICE AGENT.
- THE DRIVER CAN’T BE REPLACED.
- WHEN PRODUCTS ARE INSTALLED IN HIGH WIND ENVIRONMENTS, APPROPRIATE INSTALLATION/
FASTENING METHODS MUST BE APPLIED SO THAT THE PRODUCT MOUNTING POINTS ARE NOT
DAMAGED DUE TO VIBRATION,MOVEMENT OR CORROSION.
- GOOD PRACTICE DOES NOT RECOMMEND CONTINUOUS USE WITHOUT APPROPRIATE
SWITCHING CYCLES.
- THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES
ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
- THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE CANNOT BE REPLACED; IF THE CORD IS
DAMAGED, THE LUMINAIRE SHALL BE DESTROYED.
- IT IS RECOMMENDED TO USE A SUPPLY BOX WITH A MINIMUM IP65.THE REQUIREMENT OF CONNECT
LIGHTING USE 3P TERMINAL.
- THE TERMINAL IS RATED VOLTAGE IS 300V,RATED CURRENT IS 3A,THE WRING IS NOT LESS THAN
3x1.0MM .
- TERMINAL BLOCK IS NOT INCLUDED.INSTALLATION AND MAINTENANCE SHOULD BE IN ACCORDANCE
WITH RELEVANT LOCAL REGULATIONS (WHERE APPLICABLE) BY AN AUTHORISED AND LICENCED
ELECTRICIAN.
2
L*W*H
1.06KG
Net Weight
1.26KG
2.86KG
2.95KG
1.06KG
1.26KG
2.86KG
2.95KG
1.06KG
1.26KG
2.86KG
2.95KG
