Important Safety Warnings
This manual contains instructions and warnings that should be followed during the
installation, operating and storage of the UPS system. Please keep this manual for
further reference.
CAUTION!
To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area free of conductive contaminants. (See the specifications for the
acceptable temperature and humidity range)
CAUTION!
To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and
avoid exposing the unit to direct sunlight or installing the unit near heat emitting appliances
such as radiators.
CAUTION!
Do not plug the UPS input into its own output.
CAUTION!
Do not allow liquids or any foreign object to enter the UPS. Do not place beverages
or any other liquid-containing vessels on or near the unit.
CAUTION!
In the event of an emergency, press the OFF button and disconnect the power
cord from the AC power supply to completely disable the UPS.
CAUTION!
The UPS installation must be correctly grounded in order to reduce leakage current
below 3.5mA.
Attention
The UPS output is supplied by two sources. When the UPS is disconnected from
mains power, hazardous voltages may still be present from the internal battery. The battery
should be disconnected when maintenance or service work inside the UPS is necessary.
CAUTION!
Servicing of batteries should be undertaken or supervised by qualified personnel
only.
CAUTION!
When replacing the batteries, use the same number and type of batteries.
CAUTION!
Dispose of batteries in the correct manner and in line with local laws and
regulations. Never dispose of batteries in a fire. Do not attempt to open the battery. Released
electrolyte is harmful to the skin and eyes.
CAUTION!
Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION!
A battery can present a risk of electric shock and short circuit.
CAUTION!
This is a category C2 UPS product. In a residential environment, this product may
cause radio interference, in which case the user many be required to take additional measures.
Designed and Engineered by:
CertaUPS
www.certaups.com
Specifications
MODEL
C200-1000
C200-1500
C200-2000
CAPACITY
1000VA/700W
1500VA/1050W
2000VA/1400W
INPUT
Input Voltage
110/120VAC or 220/230/240VAC
Voltage Range
81-145VAC / 162-290VAC
OUTPUT
Voltage Regulation
+/-10%
Transfer Time
Typical 2-6ms, 10ms max.
Waveform
Pure Sinewave
BATTERY
Type & Number
12V/7Ah x 2
12V/9Ah x 2
12V/10Ah x 2
Charging Time
4-6 hours recover to 90% capacity
PHYSICAL
Dimension (DxWxH) mm
350 x 146 x 160
397 x 146 x 205
Net Weight (kgs)
8.96
12.18
13.7
C200 Uninterruptible Power Supply
User Manual
