"SMART" GARAGE DOOR OPENERS
(With Green "SMART" Button
and Green Indicator Light)
Model 83LM
Multi-Function Remote Control
PROGRAM THE OPENER TO ACCEPT THE
REMOTE CONTROL CODE
Select a remote control push button to operate the
opener. The
large
button is recommended for use
with a garage door opener.
1. Press and
hold
the selected remote control push
button (Figure 1).
2. Then press and release the green "SMART" button
on the opener panel (Figure 2). The opener light
will
flash once
. Release the remote control push
button.
Now the opener will operate when the remote push
button is pressed.
NOTE: If you release the remote control push
button before the opener light flashes, the
receiver has not accepted the code.
To Erase All Transmitter Codes
• Press and hold the "SMART" button on the opener
panel until the indicator light turns off (about 6
seconds).
ALL
the codes the opener has learned
will be erased.
• To reprogram, repeat Steps 1 and 2 for each remote
control in use.
Code programming instructions
are also located on the opener panel.
Select a remote control
push button to operate opener
Push
Button
Garage Door Opener
(With Green "SMART" Button)
Green
"Smart"
Button
Green
Indicator
Light
KG
KG
1
3
9
7
5
1
3
9
7
5
1
2
3
Owner's Manual
© 1996, Chamberlain Group Inc.
114A2017
All Rights Reserved
Printed in Mexico
Children operating or playing with a garage door
opener can injure themselves or others. The garage
door could close and cause serious injury or death.
Do not allow children to operate the wall push
button(s) or remote control(s).
A moving garage door could injure or kill someone
under it. Activate the opener only when you can see
the door clearly, it is free of obstructions, and is
properly adjusted.
ADVERTENCIA
PRECAUCION
ADVERTENCIA
ADVERTENCIA
WARNING
Model 81LM
Single-Function Remote Control
Single-Function remote case, cover, screw
(circuit board not included) Model 81LM
. . . . . . . . . . . .
41A3984-7
12 Volt battery
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10A14
Multi-Function remote case, cover, screw
(circuit board not included) Model 83LM
. . . . . . . . . . . .
41A3888-7
12 Volt battery
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10A14
Figure 1
Model 83LM
Model 81LM
Figure 2
Programming instructions are described and illustrated below. The additional push buttons on the
Multi-Function Remote Control can also activate other garage door openers and/or light controls.
(Instructions for programming light products are included with those accessories.)
FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131
The 80 Series remote control (with green battery test light) works only with door openers and light
controls having a green "SMART" button and a green indicator light.
©
Replacement Parts
FCC/DOC rules prohibit adjustments to or modification of receiver and/or transmitter circuitry except for changing the code setting and/or
replacing the transmitter battery. THERE ARE NO USER SERVICEABLE PARTS.
