background image

USER GUIDE 

 

ACTIVE WALL SPEAKERS 
 
Thank you for buying this product. We are confident it will provide you with a long reliable 
service, but just in case you experience a problem, it is supplied with a 1-year return to base 
warranty. 
 
This warranty and the product to which it relates applies to the original purchaser only and is 
not transferable (for the avoidance of doubt, this will be taken from the information held by the 
appointed national distributor at the point of sale). 
 
The liability of the manufacturer and its appointed service company is limited to the cost of 
repair and or replacement of the faulty unit under warranty. 
 
This warranty protects you against the following:  

• Failure of any components.  
• Damage when the product is first removed from its packaging if reported within 24 
hours of purchase.  

 
If you find you do have a problem with this product, you should contact the AV reseller you 
purchased this product from. The original purchaser is responsible for shipment of the product 
to the manufacturer's appointed service company for repair. 
 
The manufacturer endeavours to replace the faulty parts of the product rather than replacing 
the whole unit. 
 
This warranty does not protect this product against faults caused by abuse, misuse, incorrect 
installation, unstable or faulty power input, which might be caused by ignoring the guidelines 
set out in this guide. 
 
WARNINGS 
 
CAUTION: To reduce the risk of electric shock, do not remove cover (or back) there are no 
user-serviceable parts inside. Please refer servicing to qualified service personnel. 
 
Power Supply : 230 volt 50 Hz 

 

SAFETY INSTRUCTIONS 
 

• The product shall be connected to a power supply only of the type described.  
• To reduce the risk of fire or electrical shock, do not expose this product to rain or 
moisture.  
• Unplug the product from the wall socket when it is not to be used for a long period of 
time.  
• Adequate care shall be taken so that foreign objects do not fall, or liquids are not 
spilled into the enclosure through openings.  
• Do not remove the cover or back, as there are no user-serviceable parts inside.  

 

CONTENTS  
1. 1x Active Speaker  
2. 1x Passive Speaker  
3. 4x Wall security brackets and screws  
4. 1x 10 meter speaker cable to connect the Active to the Passive Speaker  
5. 1x Audio input cables with RCA to 3.5 Mini Jack plug  
6. 1x Audio input cable with RCA to RCA connectors  
7. 1x User Guide 
  

From March 2008, the supplied 2m fixed mains lead will be replaced by a 2m Fig8 mains lead. 

 

Summary of Contents for 1050005






Reviews: