Knee CPM Trolley
Setup
1.
Using the 3/16” hex wrench
(supplied), completely loosen
the clamp hex screw.
2.
Measure 7” (17.8 cm) from
the motor housing of the
OptiFlex3 unit and place
unit into clamp with the 7”
(17.8 cm) mark in center of
clamp.
NOTE:
It may be necessary to
obtain another person’s help in
mounting the OptiFlex3 unit to
the OptiFlex T.
3.
Using the 3/16” hex
wrench, tighten the clamp
securely.
ISO 13485 Certified Company
DJO, LLC
1430 Decision St
Vista, CA 92081 USA
Phone: 1-800-592-7329 USA
Phone: 1-317-406-2209
Fax: 1-317-406-2014
chattgroup.com
© 2010 DJO, LLC
45255D
