5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 762-1084 – (954) 577-4455 FAX (954) 929-5560
www.chauvetlighting.com
IRC-6 (Infrared Remote Control 6) Operation
Note
: Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.
Press
<AUTO>
on the IRC-6.
2.
Press
<+>
or
<–>
to choose between the different auto programs.
To adjust the speed of the automatic program:
1.
Press
<SPEED>
on the IRC-6.
2.
Press
<%>
.
3.
Press
<+>
or
<–>
to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
•
Press
<SOUND>
on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:
1.
Press
<SENSITIVITY>
on the IRC-6.
2.
Press
<%>
.
3.
Press
<+>
or
<–>
to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1.
Press
<MANUAL>
on the IRC-6.
2.
Press any number between
<0>
and
<9>
to choose your color.
To manually control the RGBWA+UV percentage:
1.
Press
<MANUAL>
on the IRC-6.
2.
Press
<R>
,
<G>
,
<B>
,
<W>
,
<A>
, or
<UV>
(red, green, blue, white, amber, or ultraviolet) to choose your color.
Note:
To use the white, amber, or UV color options, the fixture must be capable of outputting that corresponding color
light.
3.
Press
<+>
or
<–>
to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1.
Press
<STROBE>
on the IRC-6.
2.
Press
<+>
or
<–>
to increase or decrease the strobe rate.
3.
Press
<STROBE>
again to turn off the strobe.
To fade the light output:
•
Press
<FADE>
on the IRC-6.
To black out the lights:
•
Press
<BLACK OUT>
on the IRC-6. This will turn off all the lights until the button is pressed again.
Note
: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a
button is pressed, try pressing
<BLACK OUT>
. You may have inadvertently activated Black Out.
These are basic instructions for the IRC-6. See your product's User Manual for more detailed operation.
