9” ANGLE GRINDER
MODEL 35633
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
For technical questions and replacement parts, please call 1-800-444-3353
Copyright © 1996 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
®
Warning:
There are certain applications for which this
tool was designed. Harbor Freight Tools strongly rec-
ommends that this tool not be modified and/or used
for any application other than which it was designed.
All accessories must be rated for at least the RPM
speed recommended on the tool’s warning label.
Wheels and other accessories running over rated
speed can fly apart and cause injury.
For safest operation, it is recommended that only these
accessories be used with this product:
Abrasive Cut-Off Discs and Wheels - Flap Wheels - Wire Brushes - Wire Wheel Brushes
Always use an approved and proper guard when using the above mentioned accessories. Each
accessory must have the correct arbor size and must fit properly on the shoulder bushing. Make
sure accessories are tightened down securely.
CAUTION: NEVER INSTALL A CARBIDE TIPPED OR STEEL CIRCULAR SAW BLADE FOR USE ON
THIS ANGLE GRINDER. NEVER INSTALL A WOOD CARVING BLADE, CARVING DISC WITH SAW
CHAIN CUTTERS, OR A CUTTING CARVING DISC ON THIS ANGLE GRINDER.
Revised Cover Page 05/03
