1.
Welcome:
Thank you for choosing CineRAID
Thank you for your CineRAID EditPRO purchase. The EditPRO is a professional
high performance storage solution to meet your high resolution digital media and
storage requirements.
2.
What’s in the box?
Carefully unpack your EditPRO and inventory what is inside with the items list
below. Confirm that everything that is correct before moving on to the next step.
If anything is missing please contact your dealer or CineRAID.
CineRAID EditPRO T04 – 1 Qty
HDD Trays – 4 Qty
PCI-e or PCI-X RAID Card – 1 Qty
User Manual – 1 Qty
Installation CD – 1 Qty
HDD Mounting Screws – 16 Qty
I2C Cable – 1 Qty
Data Cable – 1 Qty
Standard Power Cable – 1 Qty
EditPro 4 Bay
Missing Parts?
Please contact your dealer or CineRAID if your recived a package missing any of the
above parts.
Tel: (714)961-0800 Fax: (714)961-0899
www.CineRAID.com Support@CineRAID.com
3.
Disk Tray Mounting
Confirm that all bays are secured by pushing the tray into its bay with the locking
lever open until the tray sits flush with the EditPRO. Then lock the lever in place
to secure the tray into the enclosure.
4.
RAID Controller Installation
1. Touch the metal PCI slot covers on the back of your
computer to discharge any static electricity.
2. Unplug ALL cables from your computer and
remove the side access panel according to your
system type.
3. Apple G5 users must first remove the deflector
cover and place it in a clean and safe surface.
NOTE
: Remember to replace the air deflector after
you have finished installing your RAID controller
card.
WARNING
: Allow a few minutes for the computer
internals to cool down before opening your computer.
info@CineRAID.com
www.CineRAID.com
CineRAID
2861 Saturn St. #B
Brea, CA 92821 USA
