LEDs
1 Power
Green
indicates that 15V power is present and the gateway is powered on
Off
indicates that there is no power to the gateway
2 Cloud connectivity
Green
indicates connectivity is established with the backend
status (S/W controlled)
Off
indicates connectivity to the backend
3 Controller status
Green
indicates that the gateway is active and in Normal mode
Yellow
indicates that the Linux OS has booted
Red
indicates that uBoot is complete
Blinking green
indicates that the gateway is in Test mode
Blinking and other color combinations
under S/W control. Can be used
and assigned by application developers.
Off
during initial power up or when rebooting
4 ZigBee Primary
Green
indicates that the ZigBee controller is active
RF interface active
Blinking
green indicates that the ZigBee controller is in Pairing mode
(S/W controlled)
Off
indicates that the ZigBee controller is inactive
5 Z-Wave Secondary
Green
indicates that the Z-Wave controller is active
RF interface active
Blinking
green indicates that the Z-Wave controller is in Inclusion mode
(S/W controlled)
Off
indicates that the Z-Wave controller is inactive
Cisco Connected Life Gateway
Model CLG-8202-WW
Installation Guide
Welcome
The Cisco Connected Life Gateway Model CLG-8202-WW
is a key component of the Cisco Smart and Connected
Home proposition. This service delivery platform
communicates with other network devices to provide
home security, home automation, and energy management
solutions as well as life and health monitoring and support
services. Contact your service or applications provider for
more information about Cisco Connected Life products.
POWER
MAC: 2CABA452C858
SKU: CL-72211230NA-K9
Factory ID: F2
Model No:
CLG-8202 NA
Date of mfg: 14/06
INTERNET
S/N: 254457522
15V DC
1.5A
22.5W
1
2
4
T16511
3
Bottom Panel
1 Power
Connects to the included power adapter in the
Connected Life Gateway kit
2 Power switch
Switches power on and off
3 Ethernet ports
Connects to an RJ-45 Ethernet port on a PC or
router
4 USB 2.0 port
Connects to client devices that use a USB 2.0
connector
Side Panel
1 USB 2.0 host port
Connects to client devices that use a USB 2.0 connector
2 Pairing/Reset button
Functions depending on user-defi ned applications
ZigBee
STATUS
1
2
3
4
5
T16510
1
2
T16515
PAIRING/RESET
