Americas Headquarters:
© 2012–2014 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Cisco IE 2000 Switches,
Cisco IOS Release 15.2(1)EY
January 2014
Cisco IOS Release 15.2(1)EY runs on all Cisco Industrial Ethernet IE 3000, IE 2000, and IE 3010 switches.
Cisco IOS Software Release 15.2(1)EY is part of the new software releases on Cisco IE 3000, 2000,3010
Series Switches. These releases deliver new software and hardware innovations in Industrial deployments
that span across many technologies, including support for Cisco Resilient Ethernet protocol (REP),
IEEE1588v2 Precision Timing Protocol (PTP), Common Industrial Protocol ( CIP) and Profinet V2
These release notes include important information about Cisco IOS Release15.2(1)EY, and any
limitations, restrictions, and caveats that apply to it.
Verify that these release notes are correct for your switch:
•
If you are installing a new switch, see the Cisco IOS release label on your switch rear panel.
•
If your switch is on, use the
show version
privileged EXEC command. See the
“Finding the
Software Version and Feature Set” section on page 7
.
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
“Deciding Which Files to Use” section on page 8
.
You can download the switch software from this site (registered Cisco.com users with a login password):
http://www.cisco.com/cisco/web/download/index.html
Contents
•
Cisco IOS Release Strategy, page 2
•
System Requirements, page 3
•
Upgrading the Switch License, page 7
•
Installation Notes, page 9
•
Software Features, page 10
•
Limitations and Restrictions, page 11
•
Important Notes, page 13
