●
●
Move Audio from a Cisco IP Phone 8800
Series Multiplatform Phone to Mobile Device
and Vice Versa
Objective
The Cisco IP Phone 8800 Series Multiplatform Phones allow you to pair your mobile device
such as phone or tablet through Bluetooth. This connection allows you to make and answer
phone calls on either the mobile device or the IP Phone. This ability to use the mobile line on
your IP phone is called Intelligent Proximity.
Note: To learn how to configure a mobile device on your IP Phone, click
.
After configuring your mobile device, your IP phone displays an additional phone line with
your mobile phone number. You can then make, receive, and move calls from your mobile
phone through your IP Phone.
If you have both a Bluetooth headset and a mobile device connected, you cannot use the
Bluetooth headset to answer the audio from the mobile device.
This article provides instructions on how to manage mobile calls on your Cisco IP Phone
8800 Series Multiplatform Phone.
Applicable Devices
8800 Series
Software Version
11.0.1 — 8851, 8861
Manage Audio from the IP Phone to Mobile and Vice Versa
After pairing your mobile device with your IP Phone, you can use either the IP Phone or your
mobile phone to answer or receive calls on your mobile line. You can also move or swap the
audio while on an active call. The IP Phone supports connections from Android and iOS
tablets and phones.
Move the Audio of an Active Call through your IP Phone
Step 1. Answer an incoming mobile call on your IP Phone by pressing the Answer softkey.
Otherwise, press the Decline softkey.
Note: Available options may vary according to the exact model of your device. In this
example, an iPhone6s mobile phone is configured with Cisco 8851 IP Phone.
