OMEGA Deposit - Electronic
Operating and Changing Instructions
OPENING THE LOCK
OPENING
1.
Press
#
and type in your
PIN
code (the factory setting for user 1 is
1 6 8
, for user 2 it is
8 8 8 8 8 8 8 8
2. If your PIN code is less than eight digits press
#
to confirm your number after entering the digits. (e.g. #
1 6 8 #)
3.
The LCD display will show “
OPEN”
. Turn the handle to the right (clockwise); the safe door is now
open.
N.B. If you do not want the LCD display to show your PIN code when entering it first press # followed by *
and the display will show only small squares when each digit is entered. If you input an incorrect number
when entering in your PIN code press
*
to delete the last digit entered. To delete all the digits press * and
hold it down for
two
seconds.
CLOSING
1. Close the door and turn the safe handle to the left (counter clockwise); the safe door is now locked.
CHANGING THE FIRST USER CODE
1.
First, open the safe as described above
2.
Press the red
RESET
button located on the back of the door
3.
Enter your new
PIN
code using the lock key pad; this must consist of between 3 and 8 digits.
4.
Press
#
to confirm your PIN code
5.
The LCD display will show “
IN
”
Your new code has been accepted.
CHANGING THE SECOND CODE
1.
First, open the safe as described above
2.
Press
#
3.
Enter
0 0
4.
Press the red
RESET
button located on the back of the door
5.
Enter your new
PIN
code using the lock key pad; this must consist of between 3 and 8 digits.
6.
Press
#
to confirm your PIN code
7.
The LCD display will show “
IN
”
