background image

Form No. 78522E

  8/97

 1997 Clarke 

®  

                                                                          Printed in the

READ THIS BOOK

This book has important information for the use and safe operation of this machine.  Failure to read this
book prior to operating or attempting any service or maintenance procedure to your Clarke machine
could result in injury to you or to other personnel; damage to the machine or other property could occur
as well.  You must have training in the operation of this machine before using it.  If you or your
operator(s) cannot read English, have this manual explained fully before attempting to operate this
machine.

Si  Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente antes
de tratar el manejo o servicio de esta máquina.

All directions given in this book are as seen from the operator’s position at the rear of the machine.

For new books write to:  Clarke Industries Inc.,  2100 Highway 265, Springdale,  Arkansas  72764.

Vision 38I-32I/IX-26I/IX

Owner's Manual

Effective Serial No.
32 I -UF3366

26I -UF3387

38I - UF4030

32IX - UI1191

26IX - UI1049

Summary of Contents for 26I-00260A































































Reviews: