background image

English

UNITED KINGDOM •

 

customer service

 

tel:

 020 8247 9300 

e-mail

 customerservice@clasohlson.co.uk 

internet

 www.clasohlson.co.uk 

postal

 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ

1

2

6

5

7

3

4

Ver

. 20190814

Alarm Clock

Art.no  36-7799  Model  EM3529-NO RCC

Please read the entire instruction manual before using the product 
and then save it for future reference. We reserve the right for 
any errors in text or images and any necessary changes made 
to technical data. In the event of technical problems or other 
queries, please contact our Customer Services.

Product description

Instructions for use

Batteries

1.  Remove the battery cover from the back of the clock 

and insert 2 × AA/LR6 batteries. Refer to the markings 
in the battery compartment to ensure correct polarity. 
The backlight will come on for three seconds and a short 
audible signal will be emitted when the batteries are inserted 
correctly.

2.  Refit the battery cover.

Setting the time

1.  Press and hold [ SET ] (6) until “24h” flashes.
2.  Turn [ SET ] to change the value.
3.  Press [ SET ] to confirm each step.
4.  Set the following in sequential order:

 

-

24-hour or 12-hour time format

 

-

Hours

 

-

Minutes

Setting the alarm

1.  Set [ ON/OFF ] (7) to the 

ON

 position.

2.  Press [ SET ] (6). The hours will then begin to flash.
3.  Turn [ SET ] to change the value.
4.  Press [ SET ] to confirm the setting.
5.  Set the following in sequential order:

 

-

Hours

 

-

Minutes

Alarm on/off

Activate a set alarm or deactivate the alarm by setting 
the [ ON/OFF ] switch (7) to:
• 

ON

. The alarm indicator will appear next to the alarm 

symbol (1). The alarm is activated and will sound every day 
at the set time.

• 

OFF

, the alarm is deactivated. The alarm must be activated 

manually if it is to go off at the set time.

The alarm sounds

•  The alarm increases gradually in volume in three stages.
•  The alarm will cease to sound after one minute if no button 

is pushed. The alarm will sound again after 24 hours.

Press:
•  [ SNZ/LIGHT ] (3) to start the snooze function. The alarm will 

sound again after 5 minutes.

•  [ ON/OFF ]  (7)  to 

OFF

 to deactivate the alarm. The alarm 

must be activated manually if it is to go off at set time.

Display backlight

Press [ SNZ/LIGHT ] (3) once to illuminate the display for 3 se-
conds. The display backlight goes off automatically after ap-
proximately 8 seconds.

Care and maintenance

•  Clean the product by wiping it with a damp cloth. Use only 

mild cleaning agents, never solvents or corrosive chemicals.

•  Whenever the light is not to be used for a long time, 

the batteries should be removed and it should be stored in 
a dry, dust-free environment, out of children’s reach.

Responsible disposal

1.  Alarm: The indicator is shown on the display when the alarm 

is activated

2.  AM/PM: The respective indicator is shown on the display 

when it is AM or PM

3.  [ SNZ/LIGHT ]  Snooze/display  backlight
4.  Display
5.  Battery cover
6.  [ SET ] Sets the clock time and alarm time
7.  [ ON/OFF ]  Alarm  on/off

This symbol indicates that the product should not 
be disposed of with general household waste. 
This applies throughout the entire EU. In order 
to prevent any harm to the environment or 
health hazards caused by incorrect waste 
disposal, the product must be handed in for 
recycling so that the material can be disposed 
of in a responsible manner. When recycling your 
product, take it to your local collection facility 
or contact the place of purchase. They will 
ensure that the product is disposed of in 
an environmentally sound manner.

Specifications

Batteries 

2 × AA/LR6 (sold separately)

Time format 

12/24 h

Summary of Contents for EM3529-NO RCC






Reviews: