Benämning
Art.no: XX-XXXX Model: XXXXX
Please read the entire instruction manual before use and save for future reference.
We apologise for any text or photo errors and any changes of technical data. If you have any
questions concerning technical problems please contact our Customer Service Department.
GREAT BRITAIN:
For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Internet:
www.clasohlson.co.uk
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
20140307
Digital Watch
Art.no: 36-4047
Model: YP08407/01
Please read the entire instruction manual before using
the product and save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. If you have any questions regarding
technical problems please contact Customer Services.
Description
Features
• Displays time, year, month, date and day
• Stopwatch with split-time function
• Timer function
• Alarm
• 12/24 hour display
• Backlight
• Water resistant to 10 ATM
Buttons
D. Alarm AL
• Alarm sounds daily at the set time
• 5 alarms
Setting the time
Analogue
1. Pull out the adjustment crown and turn it
to adjust the minute and hour hands.
2. Push the adjustment crown back in to
restart the analogue watch.
A. Reset button
B. Mode button
C. Backlight button
D. Start/stop button
A
B
C
Hours display
Minutes display
Seconds display
Hourly chime
activated
Digital seconds
display
Date display
Month display
Alarm
D
Display
Use
Press
MODE
(B) repeatedly to change functions. The sequence is:
Time – stopwatch – countdown timer – alarm.
A. Time
• 12/24-hour display
• Hours, minutes, seconds, day and date display
• 100-year calendar (2000–2099)
B. Stopwatch SP
• Accuracy: 1/100 second
• Stopwatch range: 00:00:00–23:59:59
C. Countdown timer TR
Countdown range: 23:59:59–00:00:00
5. Repeat steps 3 and 4 for the remaining settings.
The settings sequence is as follows: Seconds – hours –
minutes – year – month – date.
6. Push
RESET
(A) when you have completed inputting all
your settings. The day is automatically set when the year,
month and date is set.
Switching between the 12 and 24 hour display
When the watch is in time display mode, press
start/stop
(D) once to switch between 12 and
24 hour display. “PM” will be displayed when in
12 hour display mode.
Stopwatch
Without split-time
1. Press
MODE
(B) the required number of
times to reach the stopwatch settings (SP).
2. Press
start/stop
(D) to start
the stopwatch.
4. Press
RESET
(A) to reset
the stopwatch back to zero.
3. Stop the stopwatch by
pressing
start/stop
(D) again.
Digital
1. When the watch is in time display mode
press and hold
RESET
(A) until the seconds
display starts to flash.
2. Press
start/stop
(D) to reset the seconds display.
3. Press
MODE
(B) to switch to the next setting.
4. Press
start/stop
(D) repeatedly to increase
the digits incrementally. Hold the button in to
increase the digits quickly.
