English
UNITED KINGDOM •
customer service
tel:
020 8247 9300
customerservice@clasohlson.co.uk
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
Ver
. 20190603
1
2
3
Half Christmas Tree
Art.no 44-3699 Model TQ6656-H-21
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Warning:
• If the product should tip over this could lead to serious
personal injury. Make sure that the product is fixed to
the wall with the included wall bracket.
• Use fasteners suitable for the wall material and ensure that
there are no electrical wires or water pipes in the wall where
you intend to drill or screw.
Assembly
Wall bracket
1. Open up the stand, line up the holes and screw in the screws
loosely.
2. Insert the base of the tree (the part of the tree that has
the longest branches) into the stand and fasten it using
the screws.
3. Insert the remaining parts of the tree on top of each other in
the same way.
4. Fold out the branches and adjust them as you like.
1. Fit the washer onto the included
screw and screw the screw into
a wall leaving a gap of approx.
2 mm between the washer and
the wall.
2. Place the middle of the wall bracket
behind the washer, wind both
ends towards and over each other
so that there is a loop around
the screw.
3. Tighten the screw so that
the washer holds the bracket
securely against the wall.
4. Place the tree against the wall
and wind the wall bracket around
the trunk of the tree.
Care and maintenance
Clean the product using a damp cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals.
Responsible disposal
The product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Dimensions
200 × 110 cm
Stand
Metal
