background image

S

AFETY

,

O

PERATION

A

ND

M

AINTENANCE

M

ANUAL

RA-300 S

CRUBBER

This Unit is intended for commercial user.

R

EAD

& F

OLLOW

A

LL

I

NSTRUCTIONS

,

W

ARNINGS

& C

AUTIONS

B

EFORE

U

SING

T

HIS

S

CRUBBER

S

AVE

T

HESE

I

NSTRUCTIONS

RA-300 Manual - Part No 258407 - Printed in USA 01-27-10

P

AGE

1

This scrubber will afford you many years of
trouble-free operating satisfaction, provid-
ed it is given proper care. All parts have
passed rigid quality control standards prior
to being assembled to produce the finished
product. Prior to packaging, the scrubber
was again inspected for assurance of flaw-
less assembly.

Your scrubber is protectively packed to
prevent damage in shipment. We recom-
mend that upon delivery, unpack your
scrubber and inspect it for any possible
damage. Only a visual examination will
reveal damage that may have occurred in
transit. 

If damage is discovered, immediately notify
the transportation company that delivered
your scrubber. As a shipper, we are unable
to report any claim for damage. You must
originate any claim within 5 days of delivery. 

The manufacturer takes no responsibility
for damages caused to property or per-
sons due to improper use of the scrubber.
Operating instructions must always be
available for the operator. The scrubber
may only be operated by persons who have
been fully trained and authorized to use it.

R

EAD

A

LL

I

NSTRUCTIONS

B

EFORE

O

PERATING

Summary of Contents for MasterCraft RA-300









Reviews: