background image

weekly

daily

Swiss Made Quality.

before start-up

Instruction of use

Maintenance

Cleanfix Reinigungssysteme AG

 - Stettenstrasse

CH-9247 Henau-Uzwil / SG

Tel. 0041 71 955 47 47

Fax 0041 71 955 47 60

www.cleanfix.com

info@cleanfix.com

Service No.

CH

  0041 79   357 40 33

D

   0049 180 500 91 76

A

   0043 662  85  69 53

Remove the transparent cover

Remove the airfilter and clean it

Reassemble the airfilter

(pay regard to the suction hose adapter)

Remove the fresh water and dirty water

tank, empty and flush the tanks and the

fresh water filter

Remove the brushes and the pad drives

Clean and check them

Clean and check the suction nozzles

regarding abrasion, clean also the machine

Motor protection

switch

  

What to do if…..

… The machine does not function at all?

  Check the charge level of the battery.

  Check the battery connection

 –  is on the socket under tension

 –  motor protection switch press

… if there is weak or no suction at all?

  Are the suction nozzles clean

  Does the dirty-water-filter coverfit airtight

  / properly? Is the suction motor running?

  Switch on?  Suction at nozzle?

… the brushes or drive discs with pads

  do not turn?

  Check the battery charging level

  Check that the disc brushes / pad driver

  are well attached

… there is no water supply to the

  brushes / floor?

  Check that the fresh water filter is clean

  Water supply only functions, when the

  brush motor runs!

  

Technical Data

Rated voltage 

12 V ...

Capacity fresh water 

9 liters

Capacity waste water 

11 liters

Brush rotation 

240 rpm.

Brush diameter 

2 x 170 mm

Number of brushes 

2 circular brushes

Working width 

330 mm

Suction Width 

390 mm

Theoretical capacity 

1320 m

2

/h

Dimension 

L / W / H  520/400/550 mm

Shipping weight 

35,5 kg

Total weight 

44,5 kg

Sound pressure level 

67 dBA

Acceleration value 

< 2,5 m/s

2

Safety class 

I

Item No. 322-GB - 04/2012

Recharge after each use 

Turn off all switches

Before using the ma-

chine the floor must be

clean swept

The machine must be

cleaned with forward

and backward

Battery indicator is blinking

red

 =

 Battery almost empty

Battery indicator glows 

red

=

Machine switches off after 20 sec.

Battery indicator

green

 =

 Battery is loaded

                                   Operation lever for water and

brush drive constantly pressed. With this machine,

it has to be cleaned by moving forward and backward

Switcher suction motor

Switcher fresh water

and brush motor

RA 330 IBC

simply clean…

red =

 Battery charge

green =

 

Battery charged

Please use the machine on flat

surfaces and not inclined to

( For safety ).

Tilt the machine back-

wards and ensure that

the  brushes  and  the

suction nozzles are fixed

Fill the fresh water Tank

and the dose cleaning

product  with  dosing.

After charging

replug  device

Adjust  the  handle  bar

at  the  correct  height

(hip  level)  and  tighten

the clamp

Summary of Contents for RA 330 IBC


















Reviews: