background image

(2) Press PLAY/PAUSE (       )button to start
     INTRO play from track No.1.

      Press PLAY/PAUSE(     )button to pause       
      on/off alternately.
      Time display will flash on pause mode.

(5)When CD track data has been read, LCD
    screen will display the last track number 
    with the total play time.

(6)Unit will start play from track No.1 
     automatically.

The CD mechanism and the sensitive circuitry may cause interference 
to a radio tuner nearby. Do not operate this unit while operating other 
radio devices. 
Danger      This product utilizes invisible laser
                   radiation. Avoid direct exposure to
                   the beam.
Caution      Use of controls, adjustments or procedures not listed in
                   this manual may result in hazardous radiation exposure. 

Only compact discs identified with this mark can

 be used with this player.

COMPACT

DIGITAL AUDIO

(2)LCD screen will display " 15 SEC " .

(4)LCD screen will display "Er" if the unit cannot 
    read CD track data.

(1) Press MODE button three times during 
      play and "INTRO" will flash.

(3) Press FF      button to start INTRO play 
      from 

next track.

(4) Press REW      button to start INTRO play 
      from  current or previous track. 

(1)Press PLAY/PAUSE (      )button to turn 
    the power on.

      Press STOP(    )button to stop play,  
      and the last track Number will display.

(3) During pause mode, press FF      (or REW     )      
      button to play the next track (or previous track).     
      The unit will keep in pause mode and time      
      display will flash.

(1) Press FF        (or REW       )button to set the 
     desired track# . Press PLAY/PAUSE      
      button to play. Press FF       (or REW       )     
      button to change the track # during the 
      play mode.

(1) Press MODE button three times at STOP 
      mode and "INTRO" will display.

To listen to the first 10 seconds of each track.

      

(2) Press PLAY/PAUSE (     ) button to  starts
     INTRO  from track No.01.

Or

(2) During play, press REW       button to play
      previous track.

Press FF button

Press REW  button at the head of NO.4

(2) Press MODE button twice to repeat  
      all tracks.    

(1) Press MODE button once to repeat 
     one track.

      During play, press and hold  FF      (or  
      REW     ) button to fast forward (or
      fast reverse) the current track.  

(1) Press MODE button four times at STOP
     mode and "RANDOM" is displayed.

(1) Select RANDOM mode during play and 
      "RANDOM" will start flash.

(2) Press PLAY/PAUSE (      ) button to play 
     tracks in random order.

  Or

(2) Press PLAY/PAUSE      FF      or REW      
      button to play tracks in random order.    

      

(3) To cancel RANDOM mode, press MODE
      or STOP (   )button. 

(d) Repeat (b)~(c)to set up  20 tracks.
      The display will show the current set track.

(e) Set tracks can be checked by pressing 
      PROG. button.

(1) TO PROGRAM

      

(c) When desired track is displayed, press
      PROG. button to set.

(a)Press PROG. button and    
    "PROG" and "      "  will flash. 

(2) TO COMPLETE THE PROGRAMMING AND TO PLAY

      Press PLAY/PAUSE (      )button to start the 
      programmed tracks.

(b) Press FF      (or REW     ) button to select  
      the track number. 

(2) When the voltage is too low, the unit will 
      automatically turn off.

(1)      is displayed when the battery voltage  
     reaches low.

Press ANTI SHOCK button to prevent disruption 
or stopping of CD player. LCD will display "       "
at anti-shock mode.

ANTI-SHOCK

(3) TO CLEAR THE PROGRAMMING

 Press STOP(    )button.

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

(3)LCD screen will display " diSC " if CD is not 
    in the unit.

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

ANTI-SHOCK

1

ANTI-SHOCK

ALL

ANTI-SHOCK

INTRO

ANTI-SHOCK

INTRO

ANTI-SHOCK

INTRO

ANTI-SHOCK

INTRO

ANTI-SHOCK

INTRO

ANTI-SHOCK

INTRO

ANTI-SHOCK

RANDOM

ANTI-SHOCK

RANDOM

ANTI-SHOCK

RANDOM

ANTI-SHOCK

RANDOM

ANTI-SHOCK

PROG

ANTI-SHOCK

ANTI-SHOCK

PROG

ANTI-SHOCK

ANTI-SHOCK

PROG

ANTI-SHOCK

Maximum Output (Stereo Headphone..15mW+15mW(32ohm)

AC Adapter......................................110V 60Hz
DC....................................................4.5V with DC Adapter
                                                          3V with 2 size "AA" Batteries

Do not attempt to recharge alkaline batteries . This may cause 
leakage and damage to the unit.
Do not mix alkaline batteries with rechargeable batteries.
Do not leave the batteries on recharge for long periods of time. 
This can damage the performance of the cells.

Due to the nature of CD technology, the unit uses power even 
when the  unit is off. To extend the batteries' life, use the adapter 
for indoor opera-tion or where power is supplied. Use the battery 
operation only when the unit is in mobile. 

The Dynamic Bass Boost System(DBBS) enhances the low 
frequency(Bass) response of the output. Set the Volume to  
low listening level and press DBBS switch in the direction of
the arrow to turn this function ON.

Note: 

Some CD's with DBBS may exceed the bass response 
capacity and can cause distortion. To avoid this, 
do not play DBBS in high volume. Playing  DBBS in 
high volume may cause damage to the headphone 
andmore importantly, to your hearing. 

Hearing experts advise against the constant use of personal 
stereos played at high volume. Constant high volume use 
can lead to hearing loss. If youexperience ringing in the 
ears or hearing loss, discontinue use and seekmedical 
advice.

This HOLD function prevents any unwanted function changes 
during PLAY or STOP mode. Slide HOLD switch to the arrow 
direction  (or opposite) to turn the function ON (OFF). No other 
function buttons operate on HOLD mode, except DBBS function 
button.

.

To remove the disc from  its storage case, press down on the 
center of the case and lift the disc out. Hold it carefully by the 
edges as shown below. 

3. Unplug the AC adapter after charging.

DO NOT CHARGE THE BATTERIES MORE THAN 24 
HOURS OR MORE THAN RECOMMANED TIME. 
OVER CHARGINGMAY DETERIORATE THE 
PERFORMANCE OF THE RECHARGEABLE BATTERIES.

4.If the operating time decreases drastically after  the batteries 
   have been recharged properly, purchase new rechargeable 
   NiCd batteries.

Insert the disc into the unit with the label of the disc facing UP.

Gently wipe the disc using a soft cloth from the center to the 
outer direction to remove dust, fingerprints or any other 
particles on thedisc surface. Never use chemicals, such as 
record sprays , anti-staticsprays, benzene or thinners to 
clean the CD. These chemicals candamage the disc surface 
permanently.    

To avoid serious scratches on CD, keep them in the cases 
after each use. Scratches can cause the laser pick-up skip
in the future play.

Do not place stickers or write anything on the disc.

Read the instruction manual before operating this unit.
Do not expose the unit to high temperature or humidity. 
Use dampened soft cloth to clean the unit. Do not use 
strong detergent or solvent to clean the unit.

Ensure that all electrical connections (including the main plug, 
extension leads and interconnections between pieces of 
equipment)are properly made and in accordance with the 
manufacture's instructions.

Consult your dealer if you are ever in doubt about the installation, 
operation or safety of your equipment

Stop button

DC jack

LCD Display

Play/Pause button

Volume control 

Hold switch

DBBS button

Headphone jack

PROG button
MODE button

Anti-shock button

REW     button

General

CX-CD616

ALL

1

HOLD

INTRO

PROG

RANDOM

ANTI-SHOCK

FF     button

Open door lock

2.Plug in AC adapter and slide the "CHARGE SWITCH" to "ON"  
   position  to start charging.

AC Adapter Not Included

SUPER SLIM PERSONAL CD PLAYER
with 15 SECOND ANTI-SKIP PROTECTION

Your unit operates on two (2) AA  size alkaline batteries. Open the
 CD cover and insert the batteries in the battery compartment
 following the polarity diagram located inside.

You can operate this unit with two "AA" rechargeable batteries. 

For new or exhausted rechargeable batteries, we recommend
 that 

batteries are recharged for 15 hours before use.(Refer to 

battery manufacturer's guide)

When operating the unit with AC adapter and non-rechargeable
batteries in the compartment, please make sure to set the 
"charge" switch to "off" position to avoid damaging the unit.

1.Open the CD cover and insert the batteries (2 X "AA" )in the
battery compartment following the polarity diagram located

inside

 BOTH BATTERIES MUST BE  RECHARGEABLE NiCd TYPES OR THE  
 BATTERIES MAY EXPLODE OR LEAK.

BATTERY OPERATION (BATTERIES NOT INCLUDED)

RE-CHARGEABLE BATTERY OPERATION

(BATTERIES NOT INCLUDED)

To replace the insert color, gently press the three points under CD door.

DBBS FUNCTION

HOLD FUNCTION

CAUTION

Reviews: