AMP - 4K
After Sales Support 1300 663 907
www.winplus.com.au
1.
UNPACK
Unpack the Cocoon AMP - 4K from the packaging and check you have all the components:
• 1 X Cocoon AMP - 4K
• 1 X Power Adaptor
• 1 X HDMI Cable
• 1 X RCA Cable
• 1 X Remote Control
• 2 X Activ Energy AAA Batteries
• 1 X Manual
• 1 X Getting Started Guide
• 1 X Warranty Card
2.
CONNECT TO YOUR TV
Using the supplied HDMI cable, connect the Cocoon AMP - 4K
to your TV. Connect the HDMI cable to the port marked ‘HDMI’
on the rear of the AMP - 4K to the HDMI input on your TV. Ensure
your TV is set to display the correct HDMI input, for example
HDMI1.
3.
CONNECT TO POWER
Connect the power adaptor to a power outlet then connect the
cord to the rear of the AMP - 4K in the port marked ‘DC 5V’. Turn
the power adaptor on at the socket. Once connected, the AMP - 4K
will automatically begin booting up (ensure your TV is turned on).
4.
REMOTE CONTROL
Insert the included Activ Energy batteries into the remote control by removing the battery cover on the rear of the
remote. Insert the batteries, taking note of the polarity markings.
5.
CONNECT A USB DRIVE OR MICRO SD CARD
Connect a USB memory stick with your movie file that you wish to play to either of the ports marked ‘USB’. You can
also insert a MicroSD card into the slot marked ‘Micro SD’.
2
3
Getting Started Guide
HE315035
10/2015
