Installation Instructions
CL93
Best Lock modified by Command Access Technologies
STEP 1: The door must be machined with a 3/8” wire raceway,
cylindrical lock pocket & prepped for a energy transfer
hinge. Make sure the cylindrical pocket is free of debris.
STEP 4: Connect the wires exiting the lock pocket to the Bridge
Rectifier (included).
STEP 2: Run the wires from the ETH hinge through the 3/8”
raceway starting at the ETH hinge & exiting into the lock
pocket.
STEP 5: Connect the Bridge Rectifier to the plug exiting the
cylindrical chassis.
STEP 3: Screw the ETH hinge to the door. At this time DO NOT
connect the hinge wires on the jamb side to the wires
coming from the power supply.
EU: (Fail Secure) When power is applied, the outside trim will unlock. When
power is removed, the outside trim is locked.
EL: (Fail Safe) When power is applied, the outside trim will lock. When
power is removed, the outside trim is unlocked.
REX: (Request to Exit Switch) Monitors the inside handle.
STEP 8: Connect the wires from the power supply at the ETH
hinge on the jamb side. Connect the hinge to the jamb.
STEP 6: Carefully slip the connected cylindrical lock chassis into
the lock pocket paying close attention not to pinch any
wires.
STEP 7: Mount the cylindrical lock per manufacturer’s
instructions.
LEGEND OF TERMS
SOLENOIDS:
SEE BACK FOR REX TEMPLATE
VOLTS
24VAC/DC
12VAC/DC
CURRENT
150mA
250mA
COIL RESISTANCE
159 Ohms +/- 10%
49 Ohms +/- 10%
SWITCHES: .25A 24VAC/DC
REX: White - Common (C)
Blue - Normally Open (NO)
Black - Normally Closed (NC)
ELECTRICAL SPECIFICATIONS
Command Access Technologies is not a licencee, affiliated, associated or connected with Best or any of their subsidiaries or affiliates.
Command Access Technologies | 22901 La Palma Ave. Yorba Linda, CA 92831 | Phone: (888) 622-2377 | www.CommandAccess.com
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Cyl. Lock
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Cyl. Lock
Cyl. Lock
Cyl. Lock
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Cyl. Lock
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Cyl. Lock
Cyl. Lock
Cyl. Lock
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Cyl. Lock
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Cyl. Lock
Cyl. Lock
Cyl. Lock
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Cyl. Lock
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Cyl. Lock
Cyl. Lock
Cyl. Lock
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Cyl. Lock
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Cyl. Lock
Cyl. Lock
Cyl. Lock
#20269_A
