Instruction Sheet
860660202 Rev. B June 2021
www.commscope.com
© 2021 CommScope, Inc. All Rights Reserved
Page 1 of 9
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This product may be covered by one or more U.S. patents or
their foreign equivalents. For patents, see
or contact your local CommScope representative for more information.
For technical assistance, customer service, or to report any missing/damaged parts, visit us at:
http://www.commscope.com/SupportCenter
Powered Fiber Cable Transition Box
1.
General product information
This document provides the installation procedure for the Powered Fiber Cable (PFC) Transition Box (TB). The
TB is designed to facilitate the transition from indoor rated PFC to outdoor rated PFC in a neat and orderly
fashion that maintains physical separation of the different media types. See the
CommScope
Product
Catalog for available configurations.
2.
Tools and additional items required
•
Round Cable Stripper
•
Electrical Wire Stripper
•
Large Flat Screwdriver
•
Small Flat Screwdriver
•
Power Drill/Driver (as needed)
•
Fiber optic termination and cleaning supplies
•
*
CommScope
6 Port Fiber Adaptor in appropriate fiber mode (See Table 1)
•
*
CommScope
QWIK-FUSE Fiber Field Installable LC Connector Kits in appropriate fiber mode
•
*
CommScope
Furcation Tubing as required
Material ID
Description
Fiber Mode
Color
760230938
360DPis-12LC-LS
MM
AQUA
760230946
360DPis-12LC-SM
SM
BLUE
760230953 360DPis-12LC-MM
MM
GRAY
760230961 360DPis-12LCA-SM
SM
GREEN
760236043
360DPis-12LC-WB
MM
LIME GRN
760242975
360DPiP-12LC-LS
MM
AQUA
760242976 360DPiP-12LC-SM
SM
BLUE
760242977 360DPiP-12LC-WB
MM
LIME GRN
760242978 360DPiP-12LCA-SM
SM
GREEN
Table 1 – Recommended
CommScope
6 Port Fiber Adaptors
*Can be ordered from
