background image

www.commscope.com   

Bulletin # 7843672    Rev. B

Technical Publication

1

Related Support and Learning Opportunities Offered by the CommScope Infrastructure Academy

The insights and expertise contained in this manual represent just one small part of CommScope's 

global learning initiative. Few industries are evolving as quickly as wireless communications. Every 

technological innovation impacts what happens in the field. Our customers look to the CommScope 

Infrastructure Academy to make sure their technicians and installers are well trained, well-prepared, 

and well-educated to take advantage of opportunities as they evolve. To access a course, go to 

www.commscopetraining.com/coursecatalog.php, course #6107 

 

Section 1: HELIAX

®

 Pendant Connect / Accessories ………………................................………………….…02 

Section 2: General Specifications: Trunk .……………………………………………………………………….…03

Section 3: Hoisting Considerations .........................................…………………………………………..………04

Section 4: Mounting ………….......................………………....………………………………………………….…07

Section 5: General Specifications: Junpers  .....................…………………….…………………………….....08

Section 6: HQLC Installation .....................................................…………………………………………..………11

Section 8: Fiber Mapping ...........................................................................…………………………..……...…12

Section 9: FE-16148-OVP-B12 Junction Box Wiring Diagram ................…………………………..……...…13

Section 10: Breakout Procedure / DLC Connection Considerations ....…………………………..……...…15

Section 11: All-in-One Cleaner / Inspecting .....….......................................................…………………....…16

Section 12: Excess Cable Management .................................................………….….…….……………..……17

Section 13: Jacketing Removal Procedure for Universal Grounding  ...................................………………19

Section 14: Installation Check List .....................................................……………….......................….………20

Installation Guidelines – HELIAX

®

 12 RRU Assembly  

 

Solution: Pendant Configuration

Summary of Contents for FD21204-48SRC Series





















Reviews: