FTUO
I N S T A L L A T I O N I N S T R U C T I O N
Fiber termination Unit-Outdoor
• Box
• Tie-wraps
• Hook and loop fastener
• Silicone tube
• Rubber seal
• SMOUV/ANT inserts
For loose accessories see datasheet.
1 Kit content
2 Marking/drilling
Remove the tray before drilling the holes.
3.2
Mark and cut the transportation tube (not included) to length as
shown. Slide the silicone tube 20 mm over the tube.
3.3
Feed the pigtail through the transportation tube into the FTUO.
Required length ± 1.5 m.
3 Termination of the customer connection,
pigtail
3.1
Feed the transportation tube (max. ø 5 mm) through the rubber
seal into the FTUO. Secure the FTUO against the wall.
2.1
1 Wall securing positions
2 Through the wall applications ø 5 mm (knock-out)
3 On the wall applications ø 5 mm (drill ø 10 mm holes)
4 Feeder cable entry ports max. ø 12 mm (cut out by
using
pliers)
5 Optional CommScope splitter location
3.4
Secure and seal the rubber with the tube and pigtail onto the
box with tie-wraps.
1
1
5
3
3
3
4
4
3
2
2
TC-913-IP
Rev A, Mar 2017
www.commscope.com
