background image

Visit www.commscope.com for complete specifications on all the products listed 

                    Bulletin # 7689527    Rev. G

Technical Publication

1

Related Support and Learning Opportunities Offered by the CommScope Infrastructure Academy

The insights and expertise contained in this manual represent just one small part of CommScope's 

global learning initiative. Few industries are evolving as quickly as wireless communications. Every 

technological innovation impacts what happens in the field. Our customers look to the CommScope 

Infrastructure Academy to make sure their technicians and installers are well trained, well-prepared, 

and well-educated to take advantage of opportunities as they evolve. To access a course, go to 

www.commscopetraining.com/coursecatalog.php, course #6107 

 

Field Engineering Services (FES)

Support services, such as our Field Engineering Services (FES) Group gives CommScope customers 

access to technical support where and when it is needed the most — in the field. The FES team is 

staffed by an expert team of technicians who, in turn, are supported by some of the brightest and 

most experienced product line managers. With all of this knowledge and support the FES offers our 

customers access to hands-on, specialized training classes.

Section 1: Direct Breakout Components / Accessories ……………………………………………………….…02 

Section 2: General Specifications / Color Coding………………………………….....……………………….…03

Section 3: HELIAX

®

 FiberFeed

®

 Trunk Cable Hoisting .................………………………………………..………04

Section 4: HELIAX

®

 FiberFeed

®

 Tails ..........……............……………………..…….…………………………….....06

Section 5: Supporting Fiber Tails  .......................................................................……………………..……...…07

Section 6: FullAXS Installation ...............……............……………………….…….………...…………………….....09

Section 7: Breakout Procedure / Connection Considerations ......…....……………………………..……...…11

Section 8: All-in-One Cleaner / Inspecting .....…...........................................................…………………....…12

Section 9: Excess Cable Management .................................................……………….…….……………..……13

Section 10: Jacketing Removal Procedure / Check List .......................……………….…….……………..……14 

For more information, Contact Customer Service Center

United States and Mexico 1-800-255-1479 or 1-888-235-5732 

International: +1-779-435-8579

For the most current, up-to-date information on all our products and product information please visit 

our eCatalog section at www.commscope.com.

Installation Guidelines – HELIAX

®

 FiberFeed

®

 

 

Solution: 6x12 Configuration  

Summary of Contents for HELIAX FiberFeed FDH1206-24SE2 Series















Reviews: