INSTALLATION AND OPERATION MANUAL
Industrial DC-Battery Power Management System
Thank you for purchasing NetWave® from ComNet. This manual
will cover how to install hardware on your enclosure, configure
batteries, cabling, and mounting of the enclosure.
The NetWave® NWKBB100 DC-Battery Power Solution provides
consistent power for your devices in locations where power
is on a timer or they have frequent blackouts or brownouts.
The NWKBB100 supports AC input ranging from 110 to 277
VAC, and can also support higher voltages using a Step Down
Transformer. The intelligent controller distributes power to the
load and batteries when AC power is available and instantly
switches over to DC output only when AC power is lost. The kit
includes valve-regulated lead-acid batteries, outdoor enclosure,
mounting bracket and Smart DC-Battery Power Controller. The
aluminum outdoor enclosure has two 180° door hinges and
a pad lockable latch for security. The enclosure has built in
mounting brackets that support pole and wall mounting.
This manual serves the following
ComNet Model Numbers:
NWKBB100
