QUICK START CARD
2WSSR-T11
Firstech, LLC. | 1
A tap of this button will lock your doors and/or arm your Compustar alarm.
A tap of this button will unlock your doors and/or disarm your Compustar alarm.
Holding this button for 2.5 seconds will pop your trunk, if equipped. If not, ask
your Compustar Dealer for details on how to get it. Double tap to view the clock.
Holding this button for 2.5 seconds will start your vehicle. The 2WT11R-SS
will receive a page back alert and run time countdown timer will start. Run
Time Extension: If enabled, double tapping this button will reset your remote
start run time or turbo timer.
Tapping these two buttons will mute and unmute the siren on your Compustar
alarm. Holding them for 2.5 seconds will turn the Shock Sensor on or off.
Function Button: This button is used to access advanced remote
functions. Please see the following table for more info.
Wake/Mute Button: Tap this button to wake the screen. Hold this button for 2
seconds to mute your remote. Hold for 2 seconds to unmute. If enabled, tap
this button to enable sliding doors via Auxiliary 1 and 2 then double tap Lock
or Unlock to activate.
Rechargeable Battery: Your 2WT11R-SS
is equipped with a rechargeable battery.
Use the included USB cable to charge
your remote. We recommend charging
your remote before first use. Charge
time is approximately 2 hours.
Register online at www.compustar.com
within 10 days of purchase to activate
your new remote’s warranty.
Then
Press
2.5 Sec
2.5 Sec
1 x
Drive Lock
On/Off
Turbo Timer
On/Off
Auxiliary 1
Auxiliary 2
Auxiliary 3
Auxiliary 4
2 x
2nd Car
On/Off
Timer Start
On/Off
Auxiliary 5
Auxiliary 6
Auxiliary 7
3 x
Valet Mode
On/Off
Passive Mode
On/Off
FUNCTION BUTTON TABLE