Pearl
– installation instructions
Electronic push button cabinet lock
Pearl
—
Installation
instructions:
KEYPAD version
1
KEYPAD version
Powered by 2-AAAA batteries (included),
Pearl operates using a 4 to 8 digit code.
Operation is simple: type a valid code
and press
(enter). Then just turn the
knob to the unlocked or locked position.
Pearl is easy to install, and offers:
w
Programmable user
and supervisor codes
w
Programmable modes of operation
w
Programmable reset features
Pearl is intended for interior use only.
Operating Temperature: 50°F – 120°F
(10°C – 48°C)
Note:
It is strongly recommended that
batteries be replaced on an annual
basis. In the event the batteries are
exhausted, they can be replaced via
the external battery compartment.
Thank you for purchasing the CompX
®
Pearl
™
.
The Pearl is an innovative solution
for locking cabinet doors and drawers. It can mount to cabinet doors or drawers
with a material thickness of 1/32" to 1-7/16".
