InfinityEdge™ 5” and 7” In-Wall
Touch Screen
Installation Guide
Supported Models
• C4-TSWMC5 – InfinityEdge 5” In-Wall Touch Screen
• C4-TSWMC7 – InfinityEdge 7” In-Wall Touch Screen
Associated SKUs:
• C4-TSWMC5-EG-WH – InfinityEdge 5” In-Wall Touch Screen, White
• C4-TSWMC5-EG-BL – InfinityEdge 5” In-Wall Touch Screen, Black
• C4-TSWMC7-EG-WH – InfinityEdge 7” In-Wall Touch Screen, White
• C4-TSWMC7-EG-BL – InfinityEdge 7” In-Wall Touch Screen, Black
What’s in the Box
Carefully unpack the contents of the box, and make sure the following items are included
in the box. If any item is missing or damaged, please contact your Control4 Reseller.
• InfinityEdge 5” or 7” In-Wall Touch Screen
• InfinityEdge power box (used to power the Touch Screen)
• Two (2) Orange wire nuts and two (2) screws to attach the power box.
• InfinityEdge 5” and 7” In-Wall Touch Screens Installation Guide
(this document)
Important Safety Instructions
WARNING!
The Touch Screen must be protected by an external circuit breaker
or a fuse rated at 6A maximum when used in Europe.
Avertissement!
Pour réduire le risque du feu ou de choc électrique, n’exposez
pas cet appareil à la pluie ou à l’humidité.
Warnung!
Die Berührungseingabe muß durch einen externen Circuit breaker
oder eine Sicherung geschützt werden, die am Maximum 6A veranschlagen wird,
wenn sie in Europa verwendet wird.
IMPORTANT!
Do not use pens or sharp objects to navigate or make selections
on the Touch Screen. To select an item or scroll through a list, use your fingertip.
Important!
N’employez pas les stylos ou les objets pointus pour diriger ou pour
faire des choix sur l’écran. Pour choisir un article ou un rouleau par une liste,
employez votre bout du doigt.
Wichtig!
Benutzen Sie nicht Federn oder scharfe Gegenstände, um oder Vor
-
wähleren auf dem Schirm zu bilden zu steuern. Um ein Einzelteil oder eine Rolle
durch eine Liste vorzuwählen, benutzen Sie Ihre Fingerspitze.
IMPORTANT!
Improper use or installation can cause LOSS/DAMAGE OF
PROPERTY.
Important!
L’utilisation ou l’installation inexacte peut causer LOSS/DAMAGE DE
PROPRIÉTÉ.
Wichtig!
Unsachgemäßer Gebrauch oder Installation können LOSS/DAMAGE
DER EIGENSCHAFT verursachen.
IMPORTANT!
Using this product in a manner other than outlined in this document
voids your warranty. Further, Control4 is NOT liable for any damage incurred with
the misuse of this product. See “Warranty.”
Important!
Utilisant ce produit en quelque sorte autre que décrit dans ce docu
-
ment vide votre garantie. De plus, Control4 n’est pas responsable d’aucun dom
-
mage encouru avec l’abus de ce produit. Voyez que «Warranty.»
Wichtig!
Das Verwenden dieses Produktes in gewissem Sinne anders als
umrissen in diesem Dokument hebt Ihre Garantie auf. Weiter ist Control4 NICHT
für irgendeine Beschädigung verantwortlich, die mit der Fehlanwendung dieses
Produktes genommen wird. Sehen Sie, daß “Warranty.”
Introduction
The Control4
®
InfinityEdge™ 5” or 7” In-Wall Touch Screens offer complete system control
in an elegant and compact design. These Touch Screens are equipped with a capacitive
Touch Screen surface and four (4) programmable shortcut buttons. The power options
are AC power or Power-Over-Ethernet (PoE). The device may be connected via WiFi or
Ethernet. Available for new construction or retrofits.
Accessories
• Control4 Power Over Ethernet Injector, sold separately (AC-POE1-B)
• InfinityEdge 5” and 7” In-Wall Touch Screens Wall Box New Construction, Plastic
(C4-NWB57C-P)
• InfinityEdge 5” and 7” In-Wall Touch Screens Wall Box New Construction, Metal
(C4-NWB57C-M)
• InfinityEdge 5” and 7” In-Wall Touch Screens Wall Box Retrofit, Plastic
(C4-RWB57C-P)
• InfinityEdge 5” and 7” In-Wall Touch Screen Wall Box Retrofit, Metal
(C4-RWB57C-M)
Option 3: WiFi Connection with AC
WiFi placement: Place the Touch Screen above a power source, for example, an outlet.
Ensure that you have WiFi in the home (see Figure 4).
Figure 4. WiFi - Requires AC Power and WAP
Wall Box Kit Options
There are four (4) wall box options available to install this Touch Screen. Metal and plastic
wall boxes are available for new construction or retrofit installations.
•
InfinityEdge 5” or 7” In-Wall Touch Screen Wall Box Kits - New Construction
Plastic Model (C4-NWB57C-P)
Metal Model (C4-NWB57C-M)
•
InfinityEdge 5” or 7” In-Wall Touch Screen Wall Box Kit - Retrofit
Plastic Model (C4-RWB57C-P)
Metal Model (C4-RWB57C-M)
Refer to the Control4
InfinityEdge 5” or 7” In-Wall Touch Screen Wall Box Installation
Guide - New Construction
or
InfinityEdge 5” or 7” In-Wall Touch Screen Wall Box Installa-
tion Guide - Retrofit
for your wall box installation instructions.
WARNING!
Do not place the Touch Screen near sources of heat or expose to
direct sunlight for an extended period of time.
Avertissement!
Ne placez pas l’unité près des sources de chaleur ou exposition
pour diriger la lumière du soleil pendant une période prolongée.
Warnung!
Setzen Sie Maßeinheit nicht nahe Quellen der Hitze oder des Expo
-
sés, um Tageslicht während eines ausgedehnten Zeitabschnitts zu verweisen.
Figure 2. Ethernet Model - Requires Ethernet Connection to PoE Injector
Place the PoE Injector near your gateway/router/switch. Pull the Ethernet cable from that
location to where you want to install the Touch Screen.
Option 2: Ethernet Connection with AC
No PoE Injector is needed for Ethernet with AC power; the Ethernet is connected directly
to the switch. This power connection requires both neutral and hot connections (see
Figure 3).
This device uses an Ethernet or WiFi network connection, and can be powered using
PoE or AC power.
Note
: Do not attempt to use PoE and AC at the same time.
New Device
AC Power (unless using PoE)
Placement, Network Connection, and Power
Options
Place the Touch Screen in a convenient location at eye level, typically near the entrance of
the room, approximately 57 to 61 inches from the floor (see Figure 1).
Figure 1. Touch Screen Placement
Requirements for In-Wall Installations
To install the InfinityEdge 5” or 7” Touch Screen, you need the following:
• Home Controller HC-200, HC-300, HC-1000, Commercial Controller CC-300, or
CC-1000 fully installed and configured with a Control4® system.
• Control4 InfinityEdge 5” and 7” Touch Screen custom wall box installed. See “Wall
Box Kit Options” in this document.
• If using Ethernet with PoE power:
• An Ethernet network installed and available that includes a gateway/router/switch.
• Control4 PoE Injector (model #AC-POE1-B) or another third-party PoE Injector or
switch (which are certified to UL/ANSI standards).
• Two (2) Ethernet CAT5 cables to support your PoE Injector: (1) one that runs from
the Ethernet gateway/router/switch to the PoE Injector/switch and (2) one that runs
from the PoE Injector/switch to the Ethernet Touch Screen wall box.
• If using Ethernet with AC power:
• An Ethernet network installed and available that includes a gateway/router/switch.
• Access to in-wall AC power (a neutral connection is required).
• One (1) Ethernet CAT5 cable that runs from the Ethernet gateway/router/switch to
the Touch Screen.
• If using wireless with AC power:
• Wireless network (WiFi 802.11 b/g) installed and available with a wireless access
point (WAP).
• Access to in-wall AC power (a neutral connection is required).
• A 14-gauge electrical wire long enough to pull between the Touch Screen and the
power source.
This product is also designed for IT power systems with phase-to-phase voltage
120V or 240V.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by Control4.
If applicable, unplug this apparatus during lightning storms or when unused for long
periods of time.
This product is to be installed by qualified professionals only.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is dam
-
aged, liquid has been spilled or objects have fallen into the apparatus, the appara
-
tus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
1.
2.
3.
4.
5.
6.
Read and keep these instructions.
Heed all warnings and follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Install in accordance with the manufacturer’s instructions.
Install in accordance with all national and local electrical codes.
7.
8.
9.
10.
11.
12.
Figure 3. Ethernet - Requires Connection to Ethernet and AC Power
WARNING!
Install in accordance with all national, state, and local electrical
codes.
Avertissement!
Installez selon tous les national, état, et codes électriques
locaux.
WARNING!
This product generates heat. The room must have adequate
ventilation or the ability to dissipate heat effectively.
Avertissement!
Ce produit produit de la chaleur. La salle doit avoir à
ventilation proportionnée ou la capacité d’absorber la chaleur efficacement.
WARNING!
This product must be grounded in accordance with the National
Electrical Code (NEC) requirements.
Avertissement!
Ce produit doit être fondu selon les conditions électriques
nationales de code (NEC).
WARNING!
Use this product only in dry locations.
Avertissement!
Employez ce produit seulement dans des endroits secs.
CAUTION! This product is for residential use only.
Attention!
Ce produit est pour à l’usage résidentiel ou commercial seulement.
MAGNET WARNING!
Located within the plastic enclosures of this product are
strong (rare earth) magnets that are used to attach the face plate to the electrical
box. If someone handling or using the product has a pacemaker, defibrillator, or
similar electronic device used for health purposes, avoid close proximity (closer
than 20 inches) to the product until you consult your physician. Magnetic fields
can cause damage to magnetic storage media (for example, credit cards, video
tapes, computer hard drives, etc). Keep all magnets at least 20 inches away from
all types of magnetic media. Certain electronic devices are sensitive to magnetic
fields and may be damaged permanently or temporarily disabled if exposed to a
magnetic field that is too strong. Consult the owner’s manuals of your electronic
devices for further information.
Ingested magnets can cause serious injuries and may result in death. If magnets
have been ingested (or you suspect they might have been), seek competent
medical attention immediately.
Avertissement - Aimants
! Dans l’emballage en plastique de ce produit sont
inclus des aimants très puissants utilisés pour attacher les plaques de surface
aux boites électriques. Si quelqu’un, manipulant ou utilisant ce produit est muni
d’un pacemaker, défibrillateur ou autre dispositif d’ordre médical, il doit éviter de
se trouver à proximité (moins de 20 pouces) de ce produit avant d’avoir consulté
son médecin. Les champs magnétiques des aimants peuvent endommager le
stockage d’information d’ordre magnétique (ex : cartes de crédit, bandes vidéo,
disques durs d’ordinateur, etc.) Gardez tous les aimants au moins à 20 pouces
de distance de tout type de stockage d’information d’ordre magnétique. Certains
dispositifs électroniques sont sensibles aux champs magnétiques et peuvent être
endommagés de façon permanente ou être désactivés si ils sont exposés à un
champs magnétique trop puissant. Pour plus d’information, consultez le manuel
d’utilisateur propre à votre pièce électronique.
Si avalés, les aimants peuvent causer des blessures graves et aussi causer la
mort. Si des aimants ont été avalés (ou vous doutez qu’ils ont pu l’être) obtenez
les soins médicaux de personnes compétentes immédiatement.
1
2
Front and Rear Panel Description
Front View
Figure 5. Front View of the InfinityEdge 5” or 7” In-Wall Touch Screen
3
Option 1: Ethernet Connection with a PoE Injector or a
Third-Party Injector or Switch
PoE injects electrical current into the Ethernet cable using a PoE Injector (model
#AC-POE1-B) or a third-party PoE solution to provide the Touch Screen with power and
a network connection. The InfinityEdge 5” and 7” Touch Screens work with the Control4
PoE Injector or a third-party PoE Injector. To set up your PoE and Ethernet connection
with a PoE Injector, see Figure 2.
